NSN 5305-01-475-3404 · NIIN 014753404 · FSC 5305
NO DASHES 5305014753404
In Stock
SCREW,CLOSE TOLERANCE
Screws
Application: A/F-18-DCN
Technical characteristics
18 rows
Straight from the federal item record. Entries the record leaves empty are shown empty — nothing is filled in on its behalf.
| MRC | Requirement | Value |
|---|---|---|
| AAJD | THREAD CLASS | 3A |
| AAJF | THREAD DIRECTION | RIGHT-HAND |
| AASA | THREAD LENGTH | INCHES NOMINAL 0.425 |
| AASB | FASTENER LENGTH | INCHES MINIMUM 1.597 AND INCHES MAXIMUM 1.627 |
| AASK | HEAD STYLE | |
| AASL | HEAD DIAMETER | INCHES MINIMUM 0.4970 AND INCHES MAXIMUM 0.5066 |
| AASU | HEAD HEIGHT | INCHES NOMINAL 0.110 |
| AAUJ | SPLINE MAJOR DIAMETER | INCHES MINIMUM 0.219 AND INCHES MAXIMUM 0.222 |
| AAUR | GRIP DIAMETER | INCHES MINIMUM 0.2485 AND INCHES MAXIMUM 0.2495 |
| ABQZ | INTERNAL DRIVE STYLE | |
| AGAV | END ITEM IDENTIFICATION | A/F-18-DCN |
| AHYM | NOMINAL THREAD DIAMETER | INCHES 0.250 |
| ANEE | GRIP LENGTH | INCHES NOMINAL 1.312 |
| CMLP | THREAD QUANTITY PER INCH | 28 |
| CRSQ | COUNTERSINK ANGLE | DEGREES MINIMUM 99.0 AND DEGREES MAXIMUM 101.0 |
| MATT | MATERIAL | OVERALL NICKEL ALLOY 718 |
| SFTT | SURFACE TREATMENT | OVERALL PASSIVATE |
| THSD | THREAD SERIES DESIGNATOR | UNIFIED NATIONAL JOINT FINE (UNJF) |
Cross-references
13 manufacturer part numbers on file for this NSN — each shown against the CAGE code it belongs to.
| Manufacturer part number | CAGE |
|---|---|
| GS1006C4-19A | 1EM77 |
| TX1026C4-19A | 27624 |
| TX1026C4-19A | 56878 |
| 11827C4-19A | 59563 |
| TX1062C-19A | 73197 |
| 3M1169C4-19A | 76301 |
| TX1026C-19A | 80539 |
| TX1026C4-19A | C4293 |
| TX1062C-19A | L4528 |
| TX1026C4-19A | 06725 |
| TX1026C4-19A | 06950 |
| TX1062C-19A | 0PTK6 |
| TX1062C-19A | 0ZC92 |