NSN 5305-01-476-9193 · NIIN 014769193 · FSC 5305
NO DASHES 5305014769193
In Stock
SCREW,CLOSE TOLERANCE
Screws
Application: STRUCTURAL SECTION
Technical characteristics
18 rows
Straight from the federal item record. Entries the record leaves empty are shown empty — nothing is filled in on its behalf.
| MRC | Requirement | Value |
|---|---|---|
| AAJD | THREAD CLASS | 3A |
| AAJF | THREAD DIRECTION | RIGHT-HAND |
| AASA | THREAD LENGTH | INCHES NOMINAL 0.425 |
| AASB | FASTENER LENGTH | INCHES NOMINAL 0.988 |
| AASK | HEAD STYLE | |
| AASL | HEAD DIAMETER | INCHES MINIMUM 0.470 AND INCHES MAXIMUM 0.477 |
| AAUR | GRIP DIAMETER | INCHES NOMINAL 0.249 |
| ABQZ | INTERNAL DRIVE STYLE | |
| AGAV | END ITEM IDENTIFICATION | STRUCTURAL SECTION |
| AHYM | NOMINAL THREAD DIAMETER | INCHES 0.250 |
| ANEE | GRIP LENGTH | INCHES NOMINAL 0.563 |
| CMLP | THREAD QUANTITY PER INCH | 28 |
| CRSQ | COUNTERSINK ANGLE | DEGREES MINIMUM 99.0 AND DEGREES MAXIMUM 101.0 |
| CRTL | CRITICALITY CODE JUSTIFICATION | AGAV |
| CXCY | PART NAME ASSIGNED BY CONTROLLING AGENCY | SCREW,CLOSE TOLERANCE |
| MATT | MATERIAL | OVERALL NICKEL ALLOY 718 |
| SFTT | SURFACE TREATMENT | OVERALL PASSIVATE |
| THSD | THREAD SERIES DESIGNATOR | UNIFIED NATIONAL JOINT FINE (UNJF) |
Cross-references
14 manufacturer part numbers on file for this NSN — each shown against the CAGE code it belongs to.
| Manufacturer part number | CAGE |
|---|---|
| GS1006C4-9A | 1EM77 |
| WC1169C4-9A | 60516 |
| 11827D4-9A | 59563 |
| 3M1169C4-9A | 58998 |
| 11827C4-9A | 59563 |
| 3M1169D4-9A | 76301 |
| 3M1169C4-9A | 76301 |
| TX1026C4-9A | C4293 |
| 3M1169C4-9A | 007R1 |
| TX1026D4-9A | 06950 |
| TX1026D4-9A | 06725 |
| TX1026D4-9A | 0PTK6 |
| TX1026C4-9A | 0PTK6 |
| 3M1169C4-9A | 0ZC92 |
Supersedes
This item replaces cancelled NIIN 014769189. An older drawing citing one of those numbers resolves here.