NSN 5305-01-476-9194 · NIIN 014769194 · FSC 5305
NO DASHES 5305014769194
In Stock
SCREW,CLOSE TOLERANCE
Screws
Technical characteristics
16 rows
Straight from the federal item record. Entries the record leaves empty are shown empty — nothing is filled in on its behalf.
| MRC | Requirement | Value |
|---|---|---|
| AAJD | THREAD CLASS | 3A |
| AAJF | THREAD DIRECTION | RIGHT-HAND |
| AASA | THREAD LENGTH | INCHES NOMINAL 0.425 |
| AASB | FASTENER LENGTH | INCHES MINIMUM 0.972 AND INCHES MAXIMUM 1.002 |
| AASK | HEAD STYLE | |
| AASL | HEAD DIAMETER | INCHES MINIMUM 0.358 AND INCHES MAXIMUM 0.395 |
| AAUJ | SPLINE MAJOR DIAMETER | INCHES MINIMUM 0.154 AND INCHES MAXIMUM 0.156 |
| AAUR | GRIP DIAMETER | INCHES MINIMUM 0.2485 AND INCHES MAXIMUM 0.2495 |
| ABQZ | INTERNAL DRIVE STYLE | |
| AHYM | NOMINAL THREAD DIAMETER | INCHES 0.250 |
| ANEE | GRIP LENGTH | INCHES NOMINAL 0.562 |
| CMLP | THREAD QUANTITY PER INCH | 28 |
| CRSQ | COUNTERSINK ANGLE | DEGREES MINIMUM 99.0 AND DEGREES MAXIMUM 101.0 |
| MATT | MATERIAL | OVERALL STEEL COMP XM-13 |
| MDCL | MATERIAL DOCUMENT AND CLASSIFICATION | OVERALL ASSN STD SINGLE MATERIAL RESPONSE A-S 5629 |
| THSD | THREAD SERIES DESIGNATOR | UNIFIED NATIONAL JOINT FINE (UNJF) |
Cross-references
21 manufacturer part numbers on file for this NSN — each shown against the CAGE code it belongs to.
| Manufacturer part number | CAGE |
|---|---|
| 3M1170D4-9A | 1EM77 |
| 3M1170D4-9A | 1VSL7 |
| 3M1170D4-9A | 27624 |
| 3M1170D4-9A | 56878 |
| 11845D4-9A | 59563 |
| 3M1170D4-9A | 58998 |
| 3M1170D4-9A | 59563 |
| 11825D4-9A | 59563 |
| 3M1170D4-9A | 60516 |
| 3M1170D4-9A | 73197 |
| 3M1170D4-9A | 76301 |
| 3M1170D4-9A | 80539 |
| 3M1170D4-9A | 92215 |
| TX1027D4-9A | C4293 |
| 3M1170D4-9A | L4528 |
| 3M1170D4-9A | 06725 |
| 3M1170D4-9A | 06950 |
| 3M1170D4-9A | 06710 |
| TX1027D4-9A | 0PTK6 |
| 3M1170D4-9A | 0ZC92 |
| 3M1170D4-9A | 17446 |