NSN 5305-01-478-2840 · NIIN 014782840 · FSC 5305
NO DASHES 5305014782840
In Stock
SCREW,CLOSE TOLERANCE
Screws
Application: A/F-18-DCN
Technical characteristics
19 rows
Straight from the federal item record. Entries the record leaves empty are shown empty — nothing is filled in on its behalf.
| MRC | Requirement | Value |
|---|---|---|
| AAJD | THREAD CLASS | 3A |
| AAJF | THREAD DIRECTION | RIGHT-HAND |
| AASA | THREAD LENGTH | INCHES MINIMUM 0.415 AND INCHES MAXIMUM 0.435 |
| AASB | FASTENER LENGTH | INCHES MINIMUM 1.727 AND INCHES MAXIMUM 1.747 |
| AASK | HEAD STYLE | |
| AASL | HEAD DIAMETER | INCHES MINIMUM 0.385 AND INCHES MAXIMUM 0.394 |
| AASU | HEAD HEIGHT | INCHES MAXIMUM 0.060 |
| AAUJ | SPLINE MAJOR DIAMETER | INCHES MINIMUM 0.219 AND INCHES MAXIMUM 0.222 |
| AAUR | GRIP DIAMETER | INCHES MINIMUM 0.2490 AND INCHES MAXIMUM 0.2495 |
| ABQZ | INTERNAL DRIVE STYLE | |
| AGAV | END ITEM IDENTIFICATION | A/F-18-DCN |
| AHYM | NOMINAL THREAD DIAMETER | INCHES 0.250 |
| ANEE | GRIP LENGTH | INCHES MINIMUM 0.240 AND INCHES MAXIMUM 0.260 |
| CMLP | THREAD QUANTITY PER INCH | 28 |
| CQBC | MINIMUM TENSILE STRENGTH | POUNDS PER SQUARE INCH 4230 |
| CRSQ | COUNTERSINK ANGLE | DEGREES MINIMUM 99.0 AND DEGREES MAXIMUM 101.0 |
| MATT | MATERIAL | OVERALL TITANIUM ALLOY UNS R56400 |
| MDCL | MATERIAL DOCUMENT AND CLASSIFICATION | OVERALL NATIONAL SPEC SINGLE MATERIAL RESPONSE NAS4004 |
| THSD | THREAD SERIES DESIGNATOR | UNIFIED NATIONAL JOINT FINE (UNJF) |
Cross-references
14 manufacturer part numbers on file for this NSN — each shown against the CAGE code it belongs to.
| Manufacturer part number | CAGE |
|---|---|
| TX1027V4-21A | 27624 |
| TX1027V4-21A | 56878 |
| 11825-V4-21A | 59563 |
| 11845-V4-21A | 59563 |
| TX1027V4-21A | 73197 |
| 3M1170-V4-21A | 76301 |
| TX1027V4-21A | 80539 |
| TX1027V4-21A | C4293 |
| TX1027V4-21A | L4528 |
| 3M1170V4-21A | 007R1 |
| TX1027V4-21A | 06725 |
| TX1027V4-21A | 06950 |
| TX1027V4-21A | 0PTK6 |
| TX1027V4-21A | 0ZC92 |