NSN 5305-01-478-2861 · NIIN 014782861 · FSC 5305
NO DASHES 5305014782861
In Stock
SCREW,CLOSE TOLERANCE
Screws
Application: A/F-18-DCN
Technical characteristics
19 rows
Straight from the federal item record. Entries the record leaves empty are shown empty — nothing is filled in on its behalf.
| MRC | Requirement | Value |
|---|---|---|
| AAJD | THREAD CLASS | 3A |
| AAJF | THREAD DIRECTION | RIGHT-HAND |
| AASA | THREAD LENGTH | INCHES MAXIMUM 0.312 |
| AASB | FASTENER LENGTH | INCHES MAXIMUM 0.875 |
| AASK | HEAD STYLE | |
| AASL | HEAD DIAMETER | INCHES MINIMUM 0.293 AND INCHES MAXIMUM 0.301 |
| AASU | HEAD HEIGHT | INCHES MAXIMUM 0.046 |
| AAUJ | SPLINE MAJOR DIAMETER | INCHES MINIMUM 0.154 AND INCHES MAXIMUM 0.156 |
| AAUR | GRIP DIAMETER | INCHES MINIMUM 0.1890 AND INCHES MAXIMUM 0.1895 |
| ABQZ | INTERNAL DRIVE STYLE | |
| AGAV | END ITEM IDENTIFICATION | A/F-18-DCN |
| AHYM | NOMINAL THREAD DIAMETER | INCHES 0.190 |
| ANEE | GRIP LENGTH | INCHES MINIMUM 0.5525 AND INCHES MAXIMUM 0.5725 |
| CMLP | THREAD QUANTITY PER INCH | 32 |
| CQBC | MINIMUM TENSILE STRENGTH | POUNDS PER SQUARE INCH 2200 |
| CRSQ | COUNTERSINK ANGLE | DEGREES MINIMUM 99.0 AND DEGREES MAXIMUM 101.0 |
| MATT | MATERIAL | OVERALL STEEL COMP XM-13 |
| MDCL | MATERIAL DOCUMENT AND CLASSIFICATION | OVERALL MFR REF 1ST MATERIAL RESPONSE H-13-8-OCRES |
| THSD | THREAD SERIES DESIGNATOR | UNIFIED NATIONAL JOINT FINE (UNJF) |
Cross-references
14 manufacturer part numbers on file for this NSN — each shown against the CAGE code it belongs to.
| Manufacturer part number | CAGE |
|---|---|
| TX1024D3-9-5A | 27624 |
| TX1024D3-9-5A | 56878 |
| 11853-D3-9-5A | 59563 |
| TX1024D3-9-5A | 73197 |
| 3M1262-D3-9-5A | 76301 |
| TX1024D3-9-5A | 80539 |
| 10330380 | A486G |
| TX1024D3-9-5A | C4293 |
| TX1024D3-9-5A | L4528 |
| TX1024D3-9-5A | 06725 |
| TX1024D3-9-5A | 06950 |
| TX1024D3-9-5A | 0PTK6 |
| HP1169D3-9-5A | 0ZC92 |
| TX1024D3-9-5A | 0ZC92 |