NSN 5305-01-484-2512 · NIIN 014842512 · FSC 5305
NO DASHES 5305014842512
In Stock
SCREW,MACHINE
Screws
Application: A/A42RREFUELS; A/A42R-1 REFUELING SYSTEM
Technical characteristics
21 rows
Straight from the federal item record. Entries the record leaves empty are shown empty — nothing is filled in on its behalf.
| MRC | Requirement | Value |
|---|---|---|
| AAJD | THREAD CLASS | 3A |
| AAJF | THREAD DIRECTION | RIGHT-HAND |
| AASA | THREAD LENGTH | INCHES NOMINAL 0.312 |
| AASB | FASTENER LENGTH | INCHES NOMINAL 0.312 |
| AASK | HEAD STYLE | |
| AASL | HEAD DIAMETER | INCHES NOMINAL 0.395 |
| AASU | HEAD HEIGHT | INCHES NOMINAL 0.060 |
| AAUJ | SPLINE MAJOR DIAMETER | INCHES NOMINAL 0.155 |
| ABQZ | INTERNAL DRIVE STYLE | |
| AGAV | END ITEM IDENTIFICATION | A/A42RREFUELS; A/A42R-1 REFUELING SYSTEM |
| AHYM | NOMINAL THREAD DIAMETER | INCHES 0.250 |
| CMLP | THREAD QUANTITY PER INCH | 28 |
| CQBC | MINIMUM TENSILE STRENGTH | POUNDS PER SQUARE INCH 4400 |
| CRSQ | COUNTERSINK ANGLE | DEGREES NOMINAL 100.0 |
| CXCY | PART NAME ASSIGNED BY CONTROLLING AGENCY | BOLT, 100 DEG. REDUCED HEAD, GEAR DRIVE |
| CYAU | SCREW MATERIAL | STEEL COMP XM-13 |
| CYAY | BEARING SURFACE OF HEAD SURFACE TREATMENT | PASSIVATE |
| CYAZ | HEAD SURFACE TREATMENT | PASSIVATE |
| CYBA | SCREW SURFACE TREATMENT | PASSIVATE |
| HUES | COLOR | NATURAL |
| THSD | THREAD SERIES DESIGNATOR | UNIFIED NATIONAL JOINT FINE (UNJF) |
Cross-references
14 manufacturer part numbers on file for this NSN — each shown against the CAGE code it belongs to.
| Manufacturer part number | CAGE |
|---|---|
| TX1027D4-5A | 27624 |
| TX1027D4-5A | 56878 |
| 11825D4-5A | 59563 |
| 11845D4-5A | 59563 |
| TX1027D4-5A | 73197 |
| 3M1170D4-5A | 76301 |
| TX1027D4-5A | 80539 |
| TX1027D4-5A | 92215 |
| TX1027D4-5A | C4293 |
| TX1027D4-5A | L4528 |
| 3M1170D4-5A | 007R1 |
| TX1027D4-5A | 06950 |
| TX1027D4-5A | 06725 |
| HP1007D4-5A | 0ZC92 |