NSN 5305-01-504-0534 · NIIN 015040534 · FSC 5305
NO DASHES 5305015040534
In Stock
SCREW,CLOSE TOLERANCE
Screws
Application: H-46
Technical characteristics
18 rows
Straight from the federal item record. Entries the record leaves empty are shown empty — nothing is filled in on its behalf.
| MRC | Requirement | Value |
|---|---|---|
| AAJD | THREAD CLASS | 3A |
| AAJF | THREAD DIRECTION | RIGHT-HAND |
| AASA | THREAD LENGTH | INCHES NOMINAL 0.345 |
| AASB | FASTENER LENGTH | INCHES NOMINAL 0.532 |
| AASK | HEAD STYLE | |
| AASL | HEAD DIAMETER | INCHES MINIMUM 0.295 AND INCHES MAXIMUM 0.334 |
| AAUR | GRIP DIAMETER | INCHES MINIMUM 0.1890 AND INCHES MAXIMUM 0.1985 |
| ABQZ | INTERNAL DRIVE STYLE | |
| AGAV | END ITEM IDENTIFICATION | H-46 |
| AHYM | NOMINAL THREAD DIAMETER | INCHES 0.190 |
| ANEE | GRIP LENGTH | INCHES NOMINAL 0.187 |
| CMLP | THREAD QUANTITY PER INCH | 32 |
| CRSQ | COUNTERSINK ANGLE | DEGREES MINIMUM 99.0 AND DEGREES MAXIMUM 101.0 |
| MATT | MATERIAL | OVERALL IRON ALLOY 660 |
| MDCL | MATERIAL DOCUMENT AND CLASSIFICATION | OVERALL ASSN STD 1ST MATERIAL RESPONSE A-S 5737 |
| SFTT | SURFACE TREATMENT | OVERALL PASSIVATE |
| STDC | SURFACE TREATMENT DOCUMENT AND CLASSIFICATION | OVERALL FED SPEC SINGLE TREATMENT RESPONSE QQ--35, TY 2 OR 8(CLASS 95SC120 |
| THSD | THREAD SERIES DESIGNATOR | UNIFIED NATIONAL JOINT FINE (UNJF) |
Cross-references
10 manufacturer part numbers on file for this NSN — each shown against the CAGE code it belongs to.
| Manufacturer part number | CAGE |
|---|---|
| BACB30LH3U3 | 1RC86 |
| BACB30LH3U3 | 27624 |
| BACB30LH3U3 | 56878 |
| BACB30LH3U3 | 80539 |
| BACB30LH3U3 | 81205 |
| BACB30LH3U3 | 9N513 |
| BACB30LH3U3 | 06710 |
| BACB30LH3U3 | 06725 |
| BACB30LH3U3 | 06950 |
| BACB30LH3U3 | 17943 |