NSN 5305-01-507-4373 · NIIN 015074373 · FSC 5305
NO DASHES 5305015074373
In Stock
SCREW,CLOSE TOLERANCE
Screws
Application: LANDING GEAR
Technical characteristics
22 rows
Straight from the federal item record. Entries the record leaves empty are shown empty — nothing is filled in on its behalf.
| MRC | Requirement | Value |
|---|---|---|
| AAJD | THREAD CLASS | 3A |
| AAJF | THREAD DIRECTION | RIGHT-HAND |
| AASA | THREAD LENGTH | INCHES NOMINAL 0.906 |
| AASB | FASTENER LENGTH | INCHES MINIMUM 3.7035 AND INCHES MAXIMUM 3.7335 |
| AASK | HEAD STYLE | |
| AASL | HEAD DIAMETER | INCHES NOMINAL 0.838 |
| AAUB | HOLE DIAMETER | INCHES MINIMUM 0.141 AND INCHES MAXIMUM 0.146 |
| AAUR | GRIP DIAMETER | INCHES MINIMUM 0.5610 AND INCHES MAXIMUM 0.5615 |
| ABQZ | INTERNAL DRIVE STYLE | |
| AGAV | END ITEM IDENTIFICATION | LANDING GEAR |
| AHYM | NOMINAL THREAD DIAMETER | INCHES 0.5625 |
| ANEE | GRIP LENGTH | INCHES MINIMUM 2.8025 AND INCHES MAXIMUM 2.8225 |
| ASXK | HOLE QUANTITY | 1 |
| BQDM | HOLE TYPE | DRILLED |
| CMLP | THREAD QUANTITY PER INCH | 18 |
| CRHC | HOLE CONFIGURATION STYLE | |
| CRSQ | COUNTERSINK ANGLE | DEGREES MINIMUM 99.0 AND DEGREES MAXIMUM 101.0 |
| MATT | MATERIAL | OVERALL NICKEL ALLOY 718 |
| MDCL | MATERIAL DOCUMENT AND CLASSIFICATION | OVERALL ASSN STD SINGLE MATERIAL RESPONSE A-S 5662 |
| SFTT | SURFACE TREATMENT | OVERALL PASSIVATE |
| STDC | SURFACE TREATMENT DOCUMENT AND CLASSIFICATION | OVERALL FED SPEC SINGLE TREATMENT RESPONSE QQ--35 |
| THSD | THREAD SERIES DESIGNATOR | UNIFIED NATIONAL JOINT FINE (UNJF) |
Cross-references
8 manufacturer part numbers on file for this NSN — each shown against the CAGE code it belongs to.
| Manufacturer part number | CAGE |
|---|---|
| ST3M557-9D45 | 1VSL7 |
| HT4027-9D45 | 56878 |
| ST3M557-9D45 | 58998 |
| HT4027-9D45 | 73197 |
| ST3M557-9D45 | 76301 |
| ST3M557 | 76301 |
| HT4027-9D45 | 80539 |
| HT4027-9D45 | L4528 |