NSN 5305-01-507-9664 · NIIN 015079664 · FSC 5305
NO DASHES 5305015079664
In Stock
SCREW,CLOSE TOLERANCE
Screws
Technical characteristics
19 rows
Straight from the federal item record. Entries the record leaves empty are shown empty — nothing is filled in on its behalf.
| MRC | Requirement | Value |
|---|---|---|
| AAJD | THREAD CLASS | 3A |
| AAJF | THREAD DIRECTION | RIGHT-HAND |
| AASA | THREAD LENGTH | INCHES NOMINAL 0.425 |
| AASB | FASTENER LENGTH | INCHES NOMINAL 1.613 |
| AASK | HEAD STYLE | |
| AASL | HEAD DIAMETER | INCHES MINIMUM 0.464 |
| AAUB | HOLE DIAMETER | INCHES MINIMUM 0.076 AND INCHES MAXIMUM 0.086 |
| AAUR | GRIP DIAMETER | INCHES MINIMUM 0.2485 AND INCHES MAXIMUM 0.2495 |
| ABQZ | INTERNAL DRIVE STYLE | |
| AHYM | NOMINAL THREAD DIAMETER | INCHES 0.250 |
| ASXK | HOLE QUANTITY | 1 |
| BQDM | HOLE TYPE | DRILLED |
| CMLP | THREAD QUANTITY PER INCH | 28 |
| CRSQ | COUNTERSINK ANGLE | DEGREES MINIMUM 99.0 AND DEGREES MAXIMUM 101.0 |
| MATT | MATERIAL | OVERALL STEEL COMP 8740 |
| MDCL | MATERIAL DOCUMENT AND CLASSIFICATION | OVERALL MIL SPEC SINGLE MATERIAL RESPONSE -IL-S-6049 |
| SFTT | SURFACE TREATMENT | OVERALL ALUMINUM |
| STDC | SURFACE TREATMENT DOCUMENT AND CLASSIFICATION | OVERALL MIL SPEC SINGLE TREATMENT RESPONSE -IL-C-83488, TYE II CLASS 3 |
| THSD | THREAD SERIES DESIGNATOR | UNIFIED NATIONAL JOINT FINE (UNJF) |
Cross-references
11 manufacturer part numbers on file for this NSN — each shown against the CAGE code it belongs to.
| Manufacturer part number | CAGE |
|---|---|
| HT4054-4DL19 | 1VSL7 |
| ST3M730-4DL19 | 58998 |
| HT4054-4DL19 | 60516 |
| HT4054-4DL19 | 58998 |
| HT4054-4DL19 | 73197 |
| ST3M730-4DL19 | 76301 |
| HT4054-4DL19 | 80539 |
| HT4054-4DL19 | 97928 |
| HT4054-4DL19 | L4528 |
| HT4054-4DL19 | 06590 |
| HT4054-4DL19 | 17446 |