NSN 5305-01-509-0649 · NIIN 015090649 · FSC 5305
NO DASHES 5305015090649
In Stock
SCREW,CAP,SOCKET HEAD
Screws
Application: INTERIM ARMORED VEHICLE (IAV),CONTRACTOR LOGISTICS SUPPORT (CLS)
Technical characteristics
16 rows
Straight from the federal item record. Entries the record leaves empty are shown empty — nothing is filled in on its behalf.
| MRC | Requirement | Value |
|---|---|---|
| AAJF | THREAD DIRECTION | RIGHT-HAND |
| AASA | THREAD LENGTH | MILLIMETERS NOMINAL 13.7 |
| AASB | FASTENER LENGTH | MILLIMETERS NOMINAL 20.0 |
| AASK | HEAD STYLE | |
| AASL | HEAD DIAMETER | MILLIMETERS NOMINAL 10.0 |
| ABQZ | INTERNAL DRIVE STYLE | |
| AGAV | END ITEM IDENTIFICATION | INTERIM ARMORED VEHICLE (IAV),CONTRACTOR LOGISTICS SUPPORT (CLS) |
| AHYM | NOMINAL THREAD DIAMETER | MILLIMETERS 5.0 |
| ASDB | WIDTH ACROSS FLATS | MILLIMETERS NOMINAL 3.0 |
| CQBC | MINIMUM TENSILE STRENGTH | POUNDS PER SQUARE INCH 100000 |
| CQQR | THREAD PITCH IN MILLIMETERS | 0.80 |
| CQWR | EXTERNAL THREAD TOLERANCE CLASS | 6G |
| CRSQ | COUNTERSINK ANGLE | DEGREES NOMINAL 90.0 |
| MATT | MATERIAL | OVERALL STEEL COMP 316 |
| TEST | TEST DATA DOCUMENT | SPECIFICATION (INCLUDES ENGINEERING TYPE BULLETINS, BROCHURES,ETC., THAT REFLECT SPECIFICATION TYPE DATA IN SPECIFICATION FORMAT; EXCLUDES COMMERCIAL CATALOGS, INDUSTRY DIRECTORIES, AND SIMILAR TRADE PUBLICATIONS, REFLECTING GENERAL TYPE DATA ON CERTAIN ENVIRONMENTAL AND PERFORMANCE REQUIREMENTS AND TEST CONDITIONS THAT ARE SHOWN AS "TYPICAL", "AVERAGE", "NOMINAL", ETC.). I9008-ISO 898 TO 1 |
| THSD | THREAD SERIES DESIGNATOR | ISO M |
Cross-references
7 manufacturer part numbers on file for this NSN — each shown against the CAGE code it belongs to.
| Manufacturer part number | CAGE |
|---|---|
| ENISO10642-M5X20-A4-80 | I9006 |
| DIN7991-M5 | D8286 |
| DIN7991-M5X20-A4-80 | D8286 |
| ISO10642-M5X20-A4-80 | I9008 |
| 5X20MG316FSS | Z01R5 |
| 0446 3553 | ZD484 |
| 3252 | Z4484 |