SCREW,CLOSE TOLERANCE

Name: SCREW,CLOSE TOLERANCE
Brand: Atlas Air Supply
SKU: 5305015106750
Availability: LimitedAvailability

Screws

Technical characteristics

20 rows

Straight from the federal item record. Entries the record leaves empty are shown empty — nothing is filled in on its behalf.

Technical characteristics from the federal item record
MRC	Requirement	Value
AAJD	THREAD CLASS	3A
AAJF	THREAD DIRECTION	RIGHT-HAND
AASA	THREAD LENGTH	INCHES NOMINAL 0.391
AASB	FASTENER LENGTH	INCHES NOMINAL 3.203
AASK	HEAD STYLE
AASL	HEAD DIAMETER	INCHES MINIMUM 0.752 AND INCHES MAXIMUM 0.762
AAUR	GRIP DIAMETER	INCHES MINIMUM 0.374 AND INCHES MAXIMUM 0.375
AAWB	SHANK UNTHREADED HOLE DIAMETER	FIRST HOLE INCHES MINIMUM 0.106 AND INCHES MAXIMUM 0.111
ABQZ	INTERNAL DRIVE STYLE
AHYM	NOMINAL THREAD DIAMETER	INCHES 0.375
ANEE	GRIP LENGTH	INCHES NOMINAL 2.812
CMLP	THREAD QUANTITY PER INCH	24
CRSQ	COUNTERSINK ANGLE	DEGREES MINIMUM 99.0 AND DEGREES MAXIMUM 101.0
CRZS	DISTANCE FROM HEAD LARGEST BEARING SURFACE TO SHANK HOLE CENTER	FIRST HOLE INCHES MINIMUM 3.085 AND INCHES MAXIMUM 3.090
CXCY	PART NAME ASSIGNED BY CONTROLLING AGENCY	SCREW-CLOSE TOLERANCE, 100 DEGREE COUNTERSUNK, DOVETAIL SLOT HEAD, SHORT THREAD, CRES (125 KSI FSU)
MATT	MATERIAL	OVERALL STEEL COMP XM-13
MDCL	MATERIAL DOCUMENT AND CLASSIFICATION	OVERALL ASSN STD SINGLE MATERIAL RESPONSE A-S 5629
SFTT	SURFACE TREATMENT	OVERALL PASSIVATE
STDC	SURFACE TREATMENT DOCUMENT AND CLASSIFICATION	OVERALL FED SPEC SINGLE TREATMENT RESPONSE QQ--35
THSD	THREAD SERIES DESIGNATOR	UNIFIED NATIONAL JOINT FINE (UNJF)

18 manufacturer part numbers on file for this NSN — each shown against the CAGE code it belongs to.