NSN 5305-01-512-8305 · NIIN 015128305 · FSC 5305
NO DASHES 5305015128305
In Stock
SCREW,CLOSE TOLERANCE
Screws
Application: F18 E/F
Technical characteristics
18 rows
Straight from the federal item record. Entries the record leaves empty are shown empty — nothing is filled in on its behalf.
| MRC | Requirement | Value |
|---|---|---|
| AAJD | THREAD CLASS | 3A |
| AAJF | THREAD DIRECTION | RIGHT-HAND |
| AASA | THREAD LENGTH | INCHES NOMINAL 0.375 |
| AASB | FASTENER LENGTH | INCHES NOMINAL 1.375 |
| AASK | HEAD STYLE | |
| AASL | HEAD DIAMETER | INCHES MINIMUM 0.385 AND INCHES MAXIMUM 0.394 |
| AAUJ | SPLINE MAJOR DIAMETER | INCHES NOMINAL 0.155 |
| AAUR | GRIP DIAMETER | INCHES NOMINAL 0.249 |
| ABQZ | INTERNAL DRIVE STYLE | |
| AGAV | END ITEM IDENTIFICATION | F18 E/F |
| AHYM | NOMINAL THREAD DIAMETER | INCHES 0.250 |
| ANEE | GRIP LENGTH | INCHES NOMINAL 1.000 |
| CMLP | THREAD QUANTITY PER INCH | 28 |
| CRSQ | COUNTERSINK ANGLE | DEGREES MINIMUM 99.0 AND DEGREES MAXIMUM 101.0 |
| CXCY | PART NAME ASSIGNED BY CONTROLLING AGENCY | BOLT,100 DEGREE REDUCED HEAD, GEAR DRIVE RECESS-SPECIAL THREAD LENGTH, INCONEL 718 (125 KSI SHEAR) |
| MATT | MATERIAL | OVERALL NICKEL ALLOY 718 |
| SFTT | SURFACE TREATMENT | OVERALL PASSIVATE |
| THSD | THREAD SERIES DESIGNATOR | UNIFIED NATIONAL JOINT FINE (UNJF) |
Cross-references
19 manufacturer part numbers on file for this NSN — each shown against the CAGE code it belongs to.
| Manufacturer part number | CAGE |
|---|---|
| TX1024C4-16-6A | 1EM77 |
| TX1024C4-16-6A | 1VSL7 |
| TX1034C4-16-6A | 27624 |
| TX1024C4-16-6A | 4WL75 |
| TX1024C4-16-6A | 56878 |
| 11853C4-16-6A | 59563 |
| TX1024C4-16-6A | 58998 |
| WC1262C4-16-6A | 60516 |
| TX1024C4-16-6A | 73197 |
| 3M1262C4-16-6A | 76301 |
| TX1024C4-16-6A | 80539 |
| TX1024C4-16-6A | 92215 |
| TX1024C4-16-6A | C4293 |
| TX1024C4-16-6A | 06710 |
| TX1024C4-16-6A | 06950 |
| TX1024C4-16-6A | 06725 |
| TX1024C4-16-6A | 0K6Z0 |
| TX1024C4-16-6A | 0ZC92 |
| TX1024C4-16-6A | 17446 |