SCREW,CLOSE TOLERANCE

Name: SCREW,CLOSE TOLERANCE
Brand: Atlas Air Supply
SKU: 5305015128359
Availability: LimitedAvailability

Screws

Application: F/A-18E/F

Technical characteristics

24 rows

Straight from the federal item record. Entries the record leaves empty are shown empty — nothing is filled in on its behalf.

Technical characteristics from the federal item record
MRC	Requirement	Value
AAJD	THREAD CLASS	3A
AAJF	THREAD DIRECTION	RIGHT-HAND
AASA	THREAD LENGTH	INCHES NOMINAL 0.312
AASB	FASTENER LENGTH	INCHES MINIMUM 1.579 AND INCHES MAXIMUM 1.609
AASK	HEAD STYLE
AASL	HEAD DIAMETER	INCHES MINIMUM 0.464 AND INCHES MAXIMUM 0.473
AAUB	HOLE DIAMETER	INCHES MINIMUM 0.438 AND INCHES MAXIMUM 0.445
AAUJ	SPLINE MAJOR DIAMETER	INCHES MINIMUM 0.154 AND INCHES MAXIMUM 0.156
AAUR	GRIP DIAMETER	INCHES NOMINAL 0.312
AAVA	POINT DIAMETER	INCHES NOMINAL 0.469
ABQJ	POINT STYLE
ABQZ	INTERNAL DRIVE STYLE
AGAV	END ITEM IDENTIFICATION	F/A-18E/F
AHYM	NOMINAL THREAD DIAMETER	INCHES 0.312
ANEE	GRIP LENGTH	INCHES MINIMUM 1.115 AND INCHES MAXIMUM 1.135
CMLP	THREAD QUANTITY PER INCH	24
CQBC	MINIMUM TENSILE STRENGTH	POUNDS PER SQUARE INCH 5820
CRSQ	COUNTERSINK ANGLE	DEGREES MINIMUM 99.0 AND DEGREES MAXIMUM 101.0
CXCY	PART NAME ASSIGNED BY CONTROLLING AGENCY	BOLT, 100 DEGREE REDUCED HEAD, GEAR DRIVE RECESS
FEAT	SPECIAL FEATURES	125 KSI SHEAR STRENGTH
MATT	MATERIAL	OVERALL NICKEL ALLOY
MDCL	MATERIAL DOCUMENT AND CLASSIFICATION	OVERALL ASSN STD SINGLE MATERIAL RESPONSE A-S 5662
SFTT	SURFACE TREATMENT	OVERALL PASSIVATE
THSD	THREAD SERIES DESIGNATOR	UNIFIED NATIONAL JOINT FINE (UNJF)

21 manufacturer part numbers on file for this NSN — each shown against the CAGE code it belongs to.