NSN 5305-01-513-9648 · NIIN 015139648 · FSC 5305
NO DASHES 5305015139648
In Stock
SCREW,CLOSE TOLERANCE
Screws
Application: WING AIRCRAFT
Technical characteristics
18 rows
Straight from the federal item record. Entries the record leaves empty are shown empty — nothing is filled in on its behalf.
| MRC | Requirement | Value |
|---|---|---|
| AAJD | THREAD CLASS | 3A |
| AAJF | THREAD DIRECTION | RIGHT-HAND |
| AASA | THREAD LENGTH | INCHES NOMINAL 0.531 |
| AASB | FASTENER LENGTH | INCHES MINIMUM 0.953 AND INCHES MAXIMUM 0.983 |
| AASK | HEAD STYLE | |
| AASL | HEAD DIAMETER | INCHES NOMINAL 0.477 |
| AAUR | GRIP DIAMETER | INCHES MINIMUM 0.3115 AND INCHES MAXIMUM 0.3120 |
| ABQZ | INTERNAL DRIVE STYLE | |
| AGAV | END ITEM IDENTIFICATION | WING AIRCRAFT |
| AHYM | NOMINAL THREAD DIAMETER | INCHES 0.312 |
| ANEE | GRIP LENGTH | INCHES MINIMUM 0.427 AND INCHES MAXIMUM 0.447 |
| CMLP | THREAD QUANTITY PER INCH | 24 |
| CRSQ | COUNTERSINK ANGLE | DEGREES MINIMUM 99.0 AND DEGREES MAXIMUM 101.0 |
| MATT | MATERIAL | OVERALL NICKEL ALLOY 718 |
| MDCL | MATERIAL DOCUMENT AND CLASSIFICATION | OVERALL ASSN STD SINGLE MATERIAL RESPONSE A-S5662 |
| SFTT | SURFACE TREATMENT | OVERALL PASSIVATE |
| STDC | SURFACE TREATMENT DOCUMENT AND CLASSIFICATION | OVERALL FED SPEC SINGLE TREATMENT RESPONSE QQ--35 |
| THSD | THREAD SERIES DESIGNATOR | UNIFIED NATIONAL JOINT FINE (UNJF) |
Cross-references
21 manufacturer part numbers on file for this NSN — each shown against the CAGE code it belongs to.
| Manufacturer part number | CAGE |
|---|---|
| ST3M557-5-7 | 1VSL7 |
| HT4027-5-7 | 27624 |
| ST3M557-5-7 | 4WL75 |
| HT4027-5-7 | 56878 |
| ST3M557-5-7 | 60516 |
| ST3M557-5-7 | 58998 |
| 11923-5-7 | 59563 |
| ST3M557-5-7 | 73197 |
| ST3M557 | 76301 |
| ST3M557-5-7 | 76301 |
| HT4047-5-7 | 80539 |
| HT4027-5-7 | 92215 |
| ST3M557-5-7 | L4528 |
| ST3M557-5-7 | U6683 |
| ST3M557-5-7 | 007R1 |
| HT4027-5-7 | 06725 |
| ST3M557-5-7 | 06710 |
| HT4027-5-7 | 06950 |
| ST3M557-5-7 | 0K6Z0 |
| ST3M557-5-7 | 0ZC92 |
| HT4027-5-7 | 17446 |