NSN 5305-01-517-0660 · NIIN 015170660 · FSC 5305
NO DASHES 5305015170660
In Stock
SCREW,CLOSE TOLERANCE
Screws
Application: FITTING,STRUCTURAL SECTION, F/A-18(E/F)
Technical characteristics
18 rows
Straight from the federal item record. Entries the record leaves empty are shown empty — nothing is filled in on its behalf.
| MRC | Requirement | Value |
|---|---|---|
| AAJD | THREAD CLASS | 3A |
| AAJF | THREAD DIRECTION | RIGHT-HAND |
| AASA | THREAD LENGTH | INCHES NOMINAL 0.469 |
| AASB | FASTENER LENGTH | INCHES NOMINAL 1.219 |
| AASK | HEAD STYLE | |
| AASL | HEAD DIAMETER | INCHES MINIMUM 0.597 AND INCHES MAXIMUM 0.604 |
| AAUR | GRIP DIAMETER | INCHES NOMINAL 0.312 |
| ABQZ | INTERNAL DRIVE STYLE | |
| AGAV | END ITEM IDENTIFICATION | FITTING,STRUCTURAL SECTION, F/A-18(E/F) |
| AHYM | NOMINAL THREAD DIAMETER | INCHES 0.313 |
| ANEE | GRIP LENGTH | INCHES NOMINAL 0.750 |
| CMLP | THREAD QUANTITY PER INCH | 24 |
| CRSQ | COUNTERSINK ANGLE | DEGREES MINIMUM 99.0 AND DEGREES MAXIMUM 101.0 |
| CRTL | CRITICALITY CODE JUSTIFICATION | AGAV |
| CXCY | PART NAME ASSIGNED BY CONTROLLING AGENCY | SCREW,CLOSE TOLERANCE |
| MATT | MATERIAL | OVERALL NICKEL ALLOY 718 |
| SFTT | SURFACE TREATMENT | OVERALL PASSIVATE |
| THSD | THREAD SERIES DESIGNATOR | UNIFIED NATIONAL JOINT FINE (UNJF) |
Cross-references
16 manufacturer part numbers on file for this NSN — each shown against the CAGE code it belongs to.
| Manufacturer part number | CAGE |
|---|---|
| GS1006C5-1A | 1EM77 |
| GS1006C5-12A | 1EM77 |
| TX1026C5-12A | 27624 |
| TX1026C5-12A | 56878 |
| 3M1169C5-12A | 58998 |
| 11827C5-12A | 59563 |
| WC1169C5-12A | 60516 |
| TX1026C5-12A | 73197 |
| 3M1169C5-12A | 76301 |
| TX1026C5-12A | 80539 |
| TX1026C5-12A | C4293 |
| TX1026C5-12A | L4528 |
| TX1026C5-12A | 06725 |
| TX1026C5-12A | 06950 |
| TX1026C5-12A | 0PTK6 |
| 3M1169C5-12A | 0ZC92 |
Supersedes
This item replaces cancelled NIIN 014622695. An older drawing citing one of those numbers resolves here.