NSN 5305-01-517-4975 · NIIN 015174975 · FSC 5305
NO DASHES 5305015174975
In Stock
SCREW,CLOSE TOLERANCE
Screws
Application: FUSELAGE CENT
Technical characteristics
18 rows
Straight from the federal item record. Entries the record leaves empty are shown empty — nothing is filled in on its behalf.
| MRC | Requirement | Value |
|---|---|---|
| AAJD | THREAD CLASS | 3A |
| AAJF | THREAD DIRECTION | RIGHT-HAND |
| AASA | THREAD LENGTH | INCHES NOMINAL 0.338 |
| AASB | FASTENER LENGTH | INCHES NOMINAL 1.125 |
| AASK | HEAD STYLE | |
| AASL | HEAD DIAMETER | INCHES MINIMUM 0.339 AND INCHES MAXIMUM 0.381 |
| AAUR | GRIP DIAMETER | INCHES MINIMUM 0.1885 AND INCHES MAXIMUM 0.1895 |
| ABQZ | INTERNAL DRIVE STYLE | |
| AGAV | END ITEM IDENTIFICATION | FUSELAGE CENT |
| AHYM | NOMINAL THREAD DIAMETER | INCHES 0.190 |
| ANEE | GRIP LENGTH | INCHES NOMINAL 1.062 |
| CMLP | THREAD QUANTITY PER INCH | 32 |
| CRSQ | COUNTERSINK ANGLE | DEGREES MINIMUM 99.0 AND DEGREES MAXIMUM 101.0 |
| MATT | MATERIAL | OVERALL STEEL COMP 8740 |
| MDCL | MATERIAL DOCUMENT AND CLASSIFICATION | OVERALL MIL SPEC SINGLE MATERIAL RESPONSE -IL-S-6049 |
| SFTT | SURFACE TREATMENT | OVERALL ALUMINUM AND LUBRICANT |
| STDC | SURFACE TREATMENT DOCUMENT AND CLASSIFICATION | OVERALL MIL SPEC 1ST TREATMENT RESPONSE -IL-C-83488,TYE 2,CL 3 |
| THSD | THREAD SERIES DESIGNATOR | UNIFIED NATIONAL JOINT FINE (UNJF) |
Cross-references
15 manufacturer part numbers on file for this NSN — each shown against the CAGE code it belongs to.
| Manufacturer part number | CAGE |
|---|---|
| ST3M730-3L17 | 1VSL7 |
| ST3M730-3L17 | 58998 |
| WC4054-3-17A | 60516 |
| WC4054-3-17 | 60516 |
| HT4054-3-17A | 73197 |
| ST3M730-3L17 | 76301 |
| HT4054-3-17A | 80539 |
| HT4054-3-17A | 92215 |
| HT4054-3-17A | K5673 |
| HT4054-3-17A | L4528 |
| ST3M730-3L17 | 007R1 |
| HT4054-3-17A | 06950 |
| HT4054-3-17A | 0PTK6 |
| HT4054-3-17A | 17446 |
| ST3M730-3L17 | 17446 |