NSN 5305-01-526-4037 · NIIN 015264037 · FSC 5305
NO DASHES 5305015264037
In Stock
SCREW,CLOSE TOLERANCE
Screws
Technical characteristics
19 rows
Straight from the federal item record. Entries the record leaves empty are shown empty — nothing is filled in on its behalf.
| MRC | Requirement | Value |
|---|---|---|
| CMLP | THREAD QUANTITY PER INCH | 24 |
| CRSQ | COUNTERSINK ANGLE | DEGREES MINIMUM 99.0 AND DEGREES MAXIMUM 101.0 |
| CXCY | PART NAME ASSIGNED BY CONTROLLING AGENCY | BOLT, 100 DEGREE TENSION HEAD, GEAR DRIVE RECESS |
| FEAT | SPECIAL FEATURES | 125 KSI SHEAR STRENGTH |
| MATT | MATERIAL | OVERALL TITANIUM |
| ABQZ | INTERNAL DRIVE STYLE | |
| AHYM | NOMINAL THREAD DIAMETER | INCHES 0.375 |
| ANEE | GRIP LENGTH | INCHES MINIMUM 0.990 AND INCHES MAXIMUM 1.010 |
| AAUR | GRIP DIAMETER | INCHES NOMINAL 0.374 |
| AAVA | POINT DIAMETER | INCHES NOMINAL 0.578 |
| ABQJ | POINT STYLE | |
| AASL | HEAD DIAMETER | INCHES MINIMUM 0.749 AND INCHES MAXIMUM 0.760 |
| AAUJ | SPLINE MAJOR DIAMETER | INCHES MINIMUM 0.154 AND INCHES MAXIMUM 0.156 |
| AAJD | THREAD CLASS | 3A |
| AAJF | THREAD DIRECTION | RIGHT-HAND |
| AASA | THREAD LENGTH | INCHES MINIMUM 0.573 AND INCHES MAXIMUM 0.583 |
| AASB | FASTENER LENGTH | INCHES MINIMUM 1.563 AND INCHES MAXIMUM 1.593 |
| AASK | HEAD STYLE | |
| THSD | THREAD SERIES DESIGNATOR | UNIFIED NATIONAL JOINT FINE (UNJF) |
Cross-references
10 manufacturer part numbers on file for this NSN — each shown against the CAGE code it belongs to.
| Manufacturer part number | CAGE |
|---|---|
| TX1026V6-16A | 27624 |
| TX1026V6-16A | 56878 |
| TX1026V6-16A | 73197 |
| 3M1169V6-16A | 76301 |
| TX1026V6-16A | 80539 |
| TX1026V6-16A | C4293 |
| TX1026V6-16A | L4528 |
| TX1026V6-16A | 06725 |
| TX1026V6-16A | 06950 |
| TX1026V6-16A | 0PTK6 |