NSN 5305-01-534-4519 · NIIN 015344519 · FSC 5305
NO DASHES 5305015344519
In Stock
SCREW,CLOSE TOLERANCE
Screws
Technical characteristics
20 rows
Straight from the federal item record. Entries the record leaves empty are shown empty — nothing is filled in on its behalf.
| MRC | Requirement | Value |
|---|---|---|
| AAJF | THREAD DIRECTION | RIGHT-HAND |
| ABQZ | INTERNAL DRIVE STYLE | |
| AHYM | NOMINAL THREAD DIAMETER | INCHES 0.190 |
| ANEE | GRIP LENGTH | INCHES MINIMUM 0.552 AND INCHES MAXIMUM 0.572 |
| CMLP | THREAD QUANTITY PER INCH | 32 |
| CRSQ | COUNTERSINK ANGLE | DEGREES MINIMUM 99.0 AND DEGREES MAXIMUM 101.0 |
| CXCY | PART NAME ASSIGNED BY CONTROLLING AGENCY | BOLT, 100 DEGREE TENSION HEAD, GEAR DRIVE RECESS |
| MATT | MATERIAL | OVERALL NICKEL ALLOY 718 |
| ABQJ | POINT STYLE | |
| SFTT | SURFACE TREATMENT | OVERALL PASSIVATE |
| AASA | THREAD LENGTH | INCHES NOMINAL 0.345 |
| AASB | FASTENER LENGTH | INCHES MINIMUM 0.892 AND INCHES MAXIMUM 0.922 |
| AASK | HEAD STYLE | |
| AASL | HEAD DIAMETER | INCHES MINIMUM 0.372 AND INCHES MAXIMUM 0.381 |
| AAUJ | SPLINE MAJOR DIAMETER | INCHES MINIMUM 0.154 AND INCHES MAXIMUM 0.156 |
| AAUR | GRIP DIAMETER | INCHES NOMINAL 0.189 |
| AAVA | POINT DIAMETER | INCHES NOMINAL 0.345 |
| AAJD | THREAD CLASS | 3A |
| MDCL | MATERIAL DOCUMENT AND CLASSIFICATION | OVERALL ASSN STD SINGLE MATERIAL RESPONSE A-S 5662 |
| THSD | THREAD SERIES DESIGNATOR | UNIFIED NATIONAL JOINT FINE (UNJF) |
Cross-references
11 manufacturer part numbers on file for this NSN — each shown against the CAGE code it belongs to.
| Manufacturer part number | CAGE |
|---|---|
| TX1026C3-9A | 27624 |
| TX1026C3-9A | 56878 |
| TX1026C3-9A | 73197 |
| 3M1169C3-9A | 76301 |
| TX1026C3-9A | 80539 |
| TX1026C3-9A | C4293 |
| TX1026C3-9A | L4528 |
| 3M1169C3-9A | 007R1 |
| TX1026C3-9A | 06725 |
| TX1026C3-9A | 06950 |
| TX1026C3-9A | 0PTK6 |