NSN 5305-01-535-1389 · NIIN 015351389 · FSC 5305
NO DASHES 5305015351389
In Stock
SCREW,CAP,HEXAGON HEAD
Screws
Application: 6115-01-471-7088
Technical characteristics
18 rows
Straight from the federal item record. Entries the record leaves empty are shown empty — nothing is filled in on its behalf.
| MRC | Requirement | Value |
|---|---|---|
| AAJF | THREAD DIRECTION | RIGHT-HAND |
| CQBC | MINIMUM TENSILE STRENGTH | POUNDS PER SQUARE INCH 60000 |
| CRHC | HOLE CONFIGURATION STYLE | |
| CXCY | PART NAME ASSIGNED BY CONTROLLING AGENCY | HEX WASHERHEAD |
| MATT | MATERIAL | OVERALL STEEL CORROSION RESISTING |
| MDCL | MATERIAL DOCUMENT AND CLASSIFICATION | OVERALL NATIONAL STD/SPEC SINGLE MATERIAL RESPONSE ANSI B18.6.3 |
| SFTT | SURFACE TREATMENT | OVERALL ZINC |
| ASXK | HOLE QUANTITY | 1 |
| CMLP | THREAD QUANTITY PER INCH | 15 |
| AASA | THREAD LENGTH | INCHES NOMINAL 0.880 |
| AASB | FASTENER LENGTH | INCHES NOMINAL 1.098 |
| AASK | HEAD STYLE | |
| AASU | HEAD HEIGHT | INCHES MINIMUM 0.208 AND INCHES MAXIMUM 0.230 |
| AATB | WIDTH BETWEEN FLATS | INCHES NOMINAL 0.545 |
| AGAV | END ITEM IDENTIFICATION | 6115-01-471-7088 |
| AHYM | NOMINAL THREAD DIAMETER | INCHES 0.312 |
| THSD | THREAD SERIES DESIGNATOR | UNIFIED NATIONAL COARSE (UNC) |
| SUPP | SUPPLEMENTARY FEATURES | MRCS AATC JAB0.624 AND JAC0.676; AATDJAB0.035 AND JAC0.055 |
Cross-references
2 manufacturer part numbers on file for this NSN — each shown against the CAGE code it belongs to.
| Manufacturer part number | CAGE |
|---|---|
| 88-20260-43 | 30554 |
| B18.6.3 | 80204 |