NSN 5305-01-546-6692 · NIIN 015466692 · FSC 5305
NO DASHES 5305015466692
In Stock
SETSCREW
Screws
Application: 1351-01-531-3389
Technical characteristics
19 rows
Straight from the federal item record. Entries the record leaves empty are shown empty — nothing is filled in on its behalf.
| MRC | Requirement | Value |
|---|---|---|
| AASK | HEAD STYLE | |
| SFTT | SURFACE TREATMENT | OVERALL CADMIUM |
| MDCL | MATERIAL DOCUMENT AND CLASSIFICATION | OVERALL MIL SPEC SINGLE MATERIAL RESPONSE -S51964 |
| AAJD | THREAD CLASS | 3A |
| AAVA | POINT DIAMETER | INCHES MINIMUM 0.235 AND INCHES MAXIMUM 0.250 |
| FEAT | SPECIAL FEATURES | ALLOY STEEL,CADMIUM PLATING PER MS51964; HEX SOCKET END IS REDUCED TO 0.432/0.438 INCH DIA,0.170 INCH IN LGT |
| ABQJ | POINT STYLE | |
| ABQZ | INTERNAL DRIVE STYLE | |
| AGAV | END ITEM IDENTIFICATION | 1351-01-531-3389 |
| AHYM | NOMINAL THREAD DIAMETER | INCHES 0.500 |
| MATT | MATERIAL | OVERALL STEEL |
| CMLP | THREAD QUANTITY PER INCH | 20 |
| AASA | THREAD LENGTH | INCHES NOMINAL 0.580 |
| THSD | THREAD SERIES DESIGNATOR | UNF |
| CWDK | POINT CHAMFER ANGLE | DEGREES NOMINAL 118.0 |
| CXCY | PART NAME ASSIGNED BY CONTROLLING AGENCY | SETSCREW,HEX SOCKET,CUP POINT,ALLOY STEEL,CADMIUM PLATE,UNF-3A |
| AAJF | THREAD DIRECTION | RIGHT-HAND |
| AASB | FASTENER LENGTH | INCHES NOMINAL 0.750 |
| ASDB | WIDTH ACROSS FLATS | INCHES NOMINAL 0.250 |
Cross-references
1 manufacturer part number on file for this NSN — each shown against the CAGE code it belongs to.
| Manufacturer part number | CAGE |
|---|---|
| 6011597 | 53711 |