NSN 5305-01-556-6211 · NIIN 015566211 · FSC 5305
NO DASHES 5305015566211
In Stock
SCREW,CAP,HEXAGON HEAD
Screws
Application: MRAP - COMMON NSN - USED ON MAXXPRO CAT I AND 1 OTHER WEAPON SYSTEM; MRAP - MAXXPRO DASH ISS W/OGPK AND W/CROWS
Technical characteristics
16 rows
Straight from the federal item record. Entries the record leaves empty are shown empty — nothing is filled in on its behalf.
| MRC | Requirement | Value |
|---|---|---|
| THSD | THREAD SERIES DESIGNATOR | UNF |
| AASA | THREAD LENGTH | INCHES NOMINAL 1.25 |
| AASB | FASTENER LENGTH | INCHES NOMINAL 1.25 |
| CXCY | PART NAME ASSIGNED BY CONTROLLING AGENCY | SCREW,HH MACH 10-32 X 1 1/4 |
| AASK | HEAD STYLE | |
| AASU | HEAD HEIGHT | INCHES MINIMUM 0.105 AND INCHES MAXIMUM 0.120 |
| AATB | WIDTH BETWEEN FLATS | INCHES MINIMUM 0.305 AND INCHES MAXIMUM 0.312 |
| AATC | EXTENDED WASHER DIAMETER | INCHES MINIMUM 0.384 AND INCHES MAXIMUM 0.414 |
| MATT | MATERIAL | OVERALL STEEL |
| AGAV | END ITEM IDENTIFICATION | MRAP - COMMON NSN - USED ON MAXXPRO CAT I AND 1 OTHER WEAPON SYSTEM; MRAP - MAXXPRO DASH ISS W/OGPK AND W/CROWS |
| AAJD | THREAD CLASS | 2A |
| AAJF | THREAD DIRECTION | RIGHT-HAND |
| AHYM | NOMINAL THREAD DIAMETER | INCHES 0.190 |
| CMLP | THREAD QUANTITY PER INCH | 32 |
| SFTT | SURFACE TREATMENT | OVERALL ZINC |
| AATD | EXTENDED WASHER THICKNESS | INCHES MINIMUM 0.019 AND INCHES MAXIMUM 0.031 |
Cross-references
4 manufacturer part numbers on file for this NSN — each shown against the CAGE code it belongs to.
| Manufacturer part number | CAGE |
|---|---|
| 3593564C1 | 338X5 |
| 3593564C1 | 89346 |
| 12759-00538 | 0Y3H3 |
| 27604 | 0Y3H3 |
Supersedes
This item replaces cancelled NIIN 015389079. An older drawing citing one of those numbers resolves here.