SCREW,CLOSE TOLERANCE

Name: SCREW,CLOSE TOLERANCE
Brand: Atlas Air Supply
SKU: 5305015910926
Availability: LimitedAvailability

Screws

Technical characteristics

25 rows

Straight from the federal item record. Entries the record leaves empty are shown empty — nothing is filled in on its behalf.

Technical characteristics from the federal item record
MRC	Requirement	Value
AAJD	THREAD CLASS	3A
AAJF	THREAD DIRECTION	RIGHT-HAND
AASA	THREAD LENGTH	INCHES NOMINAL 0.406
AASB	FASTENER LENGTH	INCHES MINIMUM 0.704 AND INCHES MAXIMUM 0.734
AASK	HEAD STYLE
AASL	HEAD DIAMETER	INCHES MINIMUM 0.297 AND INCHES MAXIMUM 0.302
AASU	HEAD HEIGHT	INCHES MAXIMUM 0.012
AAUR	GRIP DIAMETER	INCHES MINIMUM 0.189 AND INCHES MAXIMUM 0.190
AAUY	POINT LENGTH	INCHES NOMINAL 0.039
AAWB	SHANK UNTHREADED HOLE DIAMETER	FIRST HOLE INCHES MINIMUM 0.070 AND INCHES MAXIMUM 0.075
ABQJ	POINT STYLE
ABQZ	INTERNAL DRIVE STYLE
AHYM	NOMINAL THREAD DIAMETER	INCHES 0.190
ANEE	GRIP LENGTH	INCHES MINIMUM 0.303 AND INCHES MAXIMUM 0.323
CMLP	THREAD QUANTITY PER INCH	32
CRSQ	COUNTERSINK ANGLE	DEGREES MINIMUM 99.0 AND DEGREES MAXIMUM 101.0
CRZS	DISTANCE FROM HEAD LARGEST BEARING SURFACE TO SHANK HOLE CENTER	FIRST HOLE INCHES MINIMUM 0.598 AND INCHES MAXIMUM 0.608
CWDK	POINT CHAMFER ANGLE	DEGREES NOMINAL 45.0
CXCY	PART NAME ASSIGNED BY CONTROLLING AGENCY	SCREW-CLOSE TOLERANCE, 100 DEG COUNTERSUNK, REDUCED HEAD, HI-TORQUE, NON-MAGNETIC CRES (125 KSI FSU)
FEAT	SPECIAL FEATURES	HEAD HAS A 0.80 DEG RADIUS DOME
MATT	MATERIAL	OVERALL NICKEL ALLOY 718
STDC	SURFACE TREATMENT DOCUMENT AND CLASSIFICATION	OVERALL ASSN STD SINGLE TREATMENT RESPONSE A-S 2700 -ETHOD 1
THSD	THREAD SERIES DESIGNATOR	UNIFIED NATIONAL JOINT FINE (UNJF)
SFTT	SURFACE TREATMENT	OVERALL PASSIVATE
MDCL	MATERIAL DOCUMENT AND CLASSIFICATION	OVERALL ASSN STD SINGLE MATERIAL RESPONSE A-S 5662

18 manufacturer part numbers on file for this NSN — each shown against the CAGE code it belongs to.