NSN 5305-01-599-1954 · NIIN 015991954 · FSC 5305
NO DASHES 5305015991954
In Stock
SCREW,CLOSE TOLERANCE
Screws
Application: EA6B
Technical characteristics
19 rows
Straight from the federal item record. Entries the record leaves empty are shown empty — nothing is filled in on its behalf.
| MRC | Requirement | Value |
|---|---|---|
| AAJD | THREAD CLASS | 3A |
| AAJF | THREAD DIRECTION | RIGHT-HAND |
| AASA | THREAD LENGTH | INCHES NOMINAL 0.735 |
| AASB | FASTENER LENGTH | INCHES MINIMUM 1.1210 AND INCHES MAXIMUM 1.1510 |
| AASK | HEAD STYLE | |
| AASL | HEAD DIAMETER | INCHES MINIMUM 0.3859 AND INCHES MAXIMUM 0.3948 |
| AASU | HEAD HEIGHT | INCHES MAXIMUM 0.060 |
| AAUJ | SPLINE MAJOR DIAMETER | INCHES MINIMUM 0.154 AND INCHES MAXIMUM 0.156 |
| AAUR | GRIP DIAMETER | INCHES MINIMUM 0.2490 AND INCHES MAXIMUM 0.2495 |
| ABQZ | INTERNAL DRIVE STYLE | |
| AGAV | END ITEM IDENTIFICATION | EA6B |
| AHYM | NOMINAL THREAD DIAMETER | INCHES 0.250 |
| ANEE | GRIP LENGTH | INCHES MINIMUM 1.1210 AND INCHES MAXIMUM 1.1510 |
| CMLP | THREAD QUANTITY PER INCH | 28 |
| CQBC | MINIMUM TENSILE STRENGTH | POUNDS PER SQUARE INCH 4400 |
| CRSQ | COUNTERSINK ANGLE | DEGREES MINIMUM 99.0 AND DEGREES MAXIMUM 101.0 |
| MATT | MATERIAL | OVERALL STEEL COMP XM-13 |
| MDCL | MATERIAL DOCUMENT AND CLASSIFICATION | OVERALL MFR REF 1ST MATERIAL RESPONSE H13-8-OCRES |
| THSD | THREAD SERIES DESIGNATOR | UNIFIED NATIONAL JOINT FINE (UNJF) |
Cross-references
10 manufacturer part numbers on file for this NSN — each shown against the CAGE code it belongs to.
| Manufacturer part number | CAGE |
|---|---|
| TX1027D4-17A | 27624 |
| TX1027D4-17A | 56878 |
| TX1027D4-17A | 73197 |
| 3M1170-D4-17A | 76301 |
| TX1027D4-17A | 80539 |
| TX1027D4-17A | C4293 |
| TX1027D4-17A | 06950 |
| TX1027D4-17A | 06725 |
| TX1027D4-17A | 0PTK6 |
| TX1027D4-17A | 0ZC92 |