NSN 5305-01-605-4408 · NIIN 016054408 · FSC 5305
NO DASHES 5305016054408
In Stock
SCREW,SELF-DRILLING
Screws
Application: 4320-01-533-6417
Technical characteristics
19 rows
Straight from the federal item record. Entries the record leaves empty are shown empty — nothing is filled in on its behalf.
| MRC | Requirement | Value |
|---|---|---|
| SFTT | SURFACE TREATMENT | OVERALL ZINC |
| CQBC | MINIMUM TENSILE STRENGTH | POUNDS PER SQUARE INCH 1936 |
| CRGF | NONMACHINE THREAD STYLE | |
| CXCY | PART NAME ASSIGNED BY CONTROLLING AGENCY | SELF-DRILLING FASTENER |
| FEAT | SPECIAL FEATURES | DRILLING POINT IS STYLE TEK3 |
| MATT | MATERIAL | OVERALL STEEL |
| AAJF | THREAD DIRECTION | RIGHT-HAND |
| AASB | FASTENER LENGTH | INCHES NOMINAL 0.50 |
| AASK | HEAD STYLE | |
| AASU | HEAD HEIGHT | INCHES MINIMUM 0.105 AND INCHES MAXIMUM 0.120 |
| AATB | WIDTH BETWEEN FLATS | INCHES MINIMUM 0.305 AND INCHES MAXIMUM 0.312 |
| AATC | EXTENDED WASHER DIAMETER | INCHES MINIMUM 0.384 AND INCHES MAXIMUM 0.414 |
| AATD | EXTENDED WASHER THICKNESS | INCHES MINIMUM 0.019 AND INCHES MAXIMUM 0.031 |
| AAVM | PILOT LENGTH | INCHES NOMINAL 0.30 |
| ABQJ | POINT STYLE | |
| ABQZ | INTERNAL DRIVE STYLE | |
| AGAV | END ITEM IDENTIFICATION | 4320-01-533-6417 |
| AHYM | NOMINAL THREAD DIAMETER | INCHES 0.19 |
| CMLP | THREAD QUANTITY PER INCH | 16.0 |