NSN 5305-01-627-4570 · NIIN 016274570 · FSC 5305
NO DASHES 5305016274570
In Stock
SCREW,MACHINE
Screws
Application: F-35
Technical characteristics
21 rows
Straight from the federal item record. Entries the record leaves empty are shown empty — nothing is filled in on its behalf.
| MRC | Requirement | Value |
|---|---|---|
| CYBH | BEARING SURFACE OF HEAD SURFACE FINISH | MICROINCHES 32.0 |
| CYBL | THREAD SURFACE FINISH | MICROINCHES 32.0 |
| PRPY | PROPRIETARY CHARACTERISTICS | PACS |
| THSD | THREAD SERIES DESIGNATOR | UNIFIED NATIONAL JOINT FINE (UNJF) |
| CYAU | SCREW MATERIAL | TITANIUM ALLOY |
| AATB | WIDTH BETWEEN FLATS | INCHES MINIMUM 0.367 AND INCHES MAXIMUM 0.376 |
| AHYM | NOMINAL THREAD DIAMETER | INCHES 0.2500 |
| CMLP | THREAD QUANTITY PER INCH | 28 |
| CQBC | MINIMUM TENSILE STRENGTH | POUNDS PER SQUARE INCH 160000 |
| CXCY | PART NAME ASSIGNED BY CONTROLLING AGENCY | BOLT,HEX HEAD,SIX-LOBE RECESS |
| AGAV | END ITEM IDENTIFICATION | F-35 |
| CYBK | SHANK SURFACE FINISH | MICROINCHES 32.0 |
| CYAW | SCREW MATERIAL DOCUMENT AND CLASSIFICATION | NATIONAL SPEC SINGLE MATERIAL RESPONSE A-S4928 OR A-S4967 |
| AAJD | THREAD CLASS | 3A |
| AAJF | THREAD DIRECTION | RIGHT-HAND |
| AASA | THREAD LENGTH | INCHES NOMINAL 0.425 |
| AASB | FASTENER LENGTH | INCHES MINIMUM 0.535 AND INCHES MAXIMUM 0.565 |
| AASK | HEAD STYLE | |
| AASU | HEAD HEIGHT | INCHES MINIMUM 0.125 AND INCHES MAXIMUM 0.140 |
| ABQZ | INTERNAL DRIVE STYLE | |
| AAUJ | SPLINE MAJOR DIAMETER | INCHES NOMINAL 0.221 |
Cross-references
13 manufacturer part numbers on file for this NSN — each shown against the CAGE code it belongs to.
| Manufacturer part number | CAGE |
|---|---|
| JSFB34V4-2 | 1GP79 |
| JSFB34V4-2 | 1EM77 |
| JSFB34V4-2 | 1RC86 |
| JSFB34V4-2 | 27624 |
| JSFB34V4-2 | 56878 |
| JSFB34V4-2 | 58794 |
| JSFB34V4-2 | 80539 |
| JSFB34 | 81755 |
| JSFB34V4-2 | 81755 |
| JSFB34V4-2 | 06725 |
| JSFB34V4-2 | 0K6Z0 |
| JSFB34V4-2 | 0UCY9 |
| JSFB34V4-2 | 0ZC92 |