SCREW,MACHINE

Name: SCREW,MACHINE
Brand: Atlas Air Supply
SKU: 5305016277379
Availability: LimitedAvailability

Screws

Application: F-35

Technical characteristics

24 rows

Straight from the federal item record. Entries the record leaves empty are shown empty — nothing is filled in on its behalf.

Technical characteristics from the federal item record
MRC	Requirement	Value
AASU	HEAD HEIGHT	INCHES MINIMUM 0.281 AND INCHES MAXIMUM 0.296
AAJD	THREAD CLASS	3A
AAJF	THREAD DIRECTION	RIGHT-HAND
AASA	THREAD LENGTH	INCHES NOMINAL 0.840
AASB	FASTENER LENGTH	INCHES MINIMUM 3.450 AND INCHES MAXIMUM 3.480
AASK	HEAD STYLE
CQBC	MINIMUM TENSILE STRENGTH	POUNDS PER SQUARE INCH 220000
CXCY	PART NAME ASSIGNED BY CONTROLLING AGENCY	BOLT,HEX HEAD,NICKEL ALLOY 718
CYAU	SCREW MATERIAL	NICKEL ALLOY 718
CYAW	SCREW MATERIAL DOCUMENT AND CLASSIFICATION	NATIONAL SPEC SINGLE MATERIAL RESPONSE A-S5962 OR A-S5662
CYBA	SCREW SURFACE TREATMENT	PASSIVATE
CYBE	SCREW SURFACE TREATMENT DOCUMENT AND CLASSIFICATION	NATIONAL SPEC SINGLE TREATMENT RESPONSE A-S2700
CYBH	BEARING SURFACE OF HEAD SURFACE FINISH	MICROINCHES 32.0
CYBK	SHANK SURFACE FINISH	MICROINCHES 32.0
CYBL	THREAD SURFACE FINISH	MICROINCHES 32.0
FEAT	SPECIAL FEATURES	DRILLED HOLE THRU THREADS;HOLE IS 0.141 INCHES MIN/0.151 INCHES MAX DIAMETER AND IS 0.218 INCHES FROM HOLE CENTER TO END OF THREADS
PRPY	PROPRIETARY CHARACTERISTICS	PACS
AATB	WIDTH BETWEEN FLATS	INCHES MINIMUM 0.741 AND INCHES MAXIMUM 0.752
AAUJ	SPLINE MAJOR DIAMETER	INCHES NOMINAL 0.4460
ABQZ	INTERNAL DRIVE STYLE
AGAV	END ITEM IDENTIFICATION	F-35
AHYM	NOMINAL THREAD DIAMETER	INCHES 0.5625
CMLP	THREAD QUANTITY PER INCH	18
THSD	THREAD SERIES DESIGNATOR	UNIFIED NATIONAL JOINT FINE (UNJF)

11 manufacturer part numbers on file for this NSN — each shown against the CAGE code it belongs to.