NSN 5305-01-628-4510 · NIIN 016284510 · FSC 5305
NO DASHES 5305016284510
In Stock
SCREW,CLOSE TOLERANCE
Screws
Technical characteristics
20 rows
Straight from the federal item record. Entries the record leaves empty are shown empty — nothing is filled in on its behalf.
| MRC | Requirement | Value |
|---|---|---|
| AASK | HEAD STYLE | |
| ABQZ | INTERNAL DRIVE STYLE | |
| ANEE | GRIP LENGTH | INCHES NOMINAL 0.9375 |
| CFSG | NONSTANDARD THREAD PITCH DIAMETER | INCHES -0.2175 TO 0.2175 |
| CMLP | THREAD QUANTITY PER INCH | 24 |
| CQBC | MINIMUM TENSILE STRENGTH | POUNDS PER SQUARE INCH 160000 |
| AASL | HEAD DIAMETER | INCHES MINIMUM 0.5504 AND INCHES MAXIMUM 0.5604 |
| AAJD | THREAD CLASS | 3A |
| AAJF | THREAD DIRECTION | RIGHT-HAND |
| AASA | THREAD LENGTH | INCHES NOMINAL 0.578 |
| AASB | FASTENER LENGTH | INCHES MINIMUM 1.4235 AND INCHES MAXIMUM 1.4535 |
| CXCY | PART NAME ASSIGNED BY CONTROLLING AGENCY | BOLT, 100 DEGREE REDUCED HEAD, GEAR DRIVE RECESS - 6AL-4V TITANIUM (95 KKSI SHEAR) |
| ABQJ | POINT STYLE | |
| THSD | THREAD SERIES DESIGNATOR | UNIFIED NATIONAL JOINT FINE (UNJF) |
| AASU | HEAD HEIGHT | INCHES NOMINAL 0.077 |
| AAUJ | SPLINE MAJOR DIAMETER | INCHES MINIMUM 0.154 AND INCHES MAXIMUM 0.156 |
| AAUR | GRIP DIAMETER | INCHES MINIMUM 0.3740 AND INCHES MAXIMUM 0.3745 |
| CRSQ | COUNTERSINK ANGLE | DEGREES MINIMUM 99.0 AND DEGREES MAXIMUM 101.0 |
| CWDK | POINT CHAMFER ANGLE | DEGREES NOMINAL 45.0 |
| MATT | MATERIAL | OVERALL TITANIUM |
Cross-references
16 manufacturer part numbers on file for this NSN — each shown against the CAGE code it belongs to.
| Manufacturer part number | CAGE |
|---|---|
| GS1014V6-15A | 1EM77 |
| 3M1170V6-15A | 1VSL7 |
| TX27V6-15A | 27624 |
| TX27V6-15A | 56878 |
| 3M1170V6-15A | 58998 |
| 11845V6-15A | 59563 |
| TX27V6-15A | 73197 |
| 3M1170V6-15A | 76301 |
| TX27V6-15A | 80539 |
| TX27V6-15A | 92215 |
| TX27V6-15A | C4293 |
| 3M1170V6-15A | 06710 |
| TX27V6-15A | 06950 |
| TX27V6-15A | 06725 |
| 3M1170V6-15A | 0K6Z0 |
| 3M1170V6-15A | 0ZC92 |