NSN 5305-01-646-1435 · NIIN 016461435 · FSC 5305
NO DASHES 5305016461435
In Stock
SCREW,CLOSE TOLERANCE
Screws
Application: F-35
Technical characteristics
20 rows
Straight from the federal item record. Entries the record leaves empty are shown empty — nothing is filled in on its behalf.
| MRC | Requirement | Value |
|---|---|---|
| CMLP | THREAD QUANTITY PER INCH | 24 |
| AASA | THREAD LENGTH | INCHES NOMINAL 0.5010 |
| AASB | FASTENER LENGTH | INCHES NOMINAL 1.2510 |
| AASK | HEAD STYLE | |
| AASU | HEAD HEIGHT | INCHES NOMINAL 0.0700 |
| AHYM | NOMINAL THREAD DIAMETER | INCHES 0.3125 |
| ANEE | GRIP LENGTH | INCHES NOMINAL 0.7500 |
| MATT | MATERIAL | OVERALL TITANIUM ALLOY UNS R56400 |
| AAUJ | SPLINE MAJOR DIAMETER | INCHES NOMINAL 0.2210 |
| ABQZ | INTERNAL DRIVE STYLE | |
| AAJD | THREAD CLASS | 3A |
| AAJF | THREAD DIRECTION | RIGHT-HAND |
| AASL | HEAD DIAMETER | INCHES NOMINAL 0.4460 |
| CRSQ | COUNTERSINK ANGLE | DEGREES MINIMUM 99.0 AND DEGREES MAXIMUM 101.0 |
| CXCY | PART NAME ASSIGNED BY CONTROLLING AGENCY | BOLT, 100 DEG FLUSH, REDUCED HEAD, SIX-LOBE RECESS |
| CQBC | MINIMUM TENSILE STRENGTH | POUNDS PER SQUARE INCH 5000 |
| PRPY | PROPRIETARY CHARACTERISTICS | PACS |
| THSD | THREAD SERIES DESIGNATOR | UNIFIED NATIONAL JOINT FINE (UNJF) |
| MDCL | MATERIAL DOCUMENT AND CLASSIFICATION | OVERALL ASSN STD SINGLE MATERIAL RESPONSE A-S 4967 |
| AGAV | END ITEM IDENTIFICATION | F-35 |
Cross-references
11 manufacturer part numbers on file for this NSN — each shown against the CAGE code it belongs to.
| Manufacturer part number | CAGE |
|---|---|
| JSFB15V5-12 | 1EM77 |
| JSFB15V5-12 | 1GP79 |
| JSFB15V5-12 | 1RC86 |
| JSFB15V5-12 | 27624 |
| JSFB15V5-12 | 56878 |
| JSFB15V5-12 | 58794 |
| JSFB15V5-12 | 80539 |
| JSFB15V5-12 | 81755 |
| JSFB15V5-12 | 06725 |
| JSFB15V5-12 | 0K6Z0 |
| JSFB15V5-12 | 0ZC92 |