NSN 5305-01-660-3482 · NIIN 016603482 · FSC 5305
NO DASHES 5305016603482
In Stock
SCREW,CLOSE TOLERANCE
Screws
Application: F/A-18 E/F
Technical characteristics
31 rows
Straight from the federal item record. Entries the record leaves empty are shown empty — nothing is filled in on its behalf.
| MRC | Requirement | Value |
|---|---|---|
| CSYM | SURFACE FINISH | THREADS MICROINCHES 32.0 |
| CSYM | SURFACE FINISH | FIRST HOLE MICROINCHES 125.0 |
| MATT | MATERIAL | OVERALL NICKEL ALLOY 718 |
| MDCL | MATERIAL DOCUMENT AND CLASSIFICATION | OVERALL NATIONAL STD/SPEC SINGLE MATERIAL RESPONSE A-S 5662 |
| THSD | THREAD SERIES DESIGNATOR | UNIFIED NATIONAL JOINT FINE (UNJF) |
| CRZS | DISTANCE FROM HEAD LARGEST BEARING SURFACE TO SHANK HOLE CENTER | FIRST HOLE INCHES NOMINAL 1.5465 |
| ANEE | GRIP LENGTH | INCHES MINIMUM 1.1775 AND INCHES MAXIMUM 1.1975 |
| CXCY | PART NAME ASSIGNED BY CONTROLLING AGENCY | BOLT,100 DEGREE TENSION HEAD,GEAR DRIVE RECESS - PH13-8MO(125 KSI SHEAR)INCONEL 718(125 KSI SHEAR),6AL-4V TITANIUM(95 KSI SHEAR) |
| BQDM | HOLE TYPE | DRILLED |
| CMLP | THREAD QUANTITY PER INCH | 24 |
| CRSQ | COUNTERSINK ANGLE | DEGREES MINIMUM 99.0 AND DEGREES MAXIMUM 101.0 |
| AAJD | THREAD CLASS | 3A |
| AAJF | THREAD DIRECTION | RIGHT-HAND |
| AASA | THREAD LENGTH | INCHES NOMINAL 0.469 |
| AASB | FASTENER LENGTH | INCHES MINIMUM 1.6415 AND INCHES MAXIMUM 1.6715 |
| AASK | HEAD STYLE | |
| AASL | HEAD DIAMETER | INCHES MINIMUM 0.6230 AND INCHES MAXIMUM 0.6335 |
| AASU | HEAD HEIGHT | INCHES NOMINAL 0.138 |
| AAUB | HOLE DIAMETER | INCHES MINIMUM 0.076 AND INCHES MAXIMUM 0.086 |
| AAUJ | SPLINE MAJOR DIAMETER | INCHES NOMINAL 0.221 |
| AAUR | GRIP DIAMETER | INCHES MINIMUM 0.3110 AND INCHES MAXIMUM 0.3120 |
| ZZZK | SPECIFICATION/STANDARD DATA | MANUFACTURERS STANDARD 76301-3-1169 |
| SFTT | SURFACE TREATMENT | OVERALL PASSIVATE |
| CSYM | SURFACE FINISH | GRIP MICROINCHES 32.0 |
| CSYM | SURFACE FINISH | HEAD MICROINCHES 32.0 |
| AGAV | END ITEM IDENTIFICATION | F/A-18 E/F |
| ASXK | HOLE QUANTITY | 1 |
| AAWB | SHANK UNTHREADED HOLE DIAMETER | FIRST HOLE INCHES MINIMUM 0.076 AND INCHES MAXIMUM 0.086 |
| AAWU | SINGLE SHEAR STRENGTH | POUNDS PER SQUARE INCH (PSI) 125000 |
| ABQZ | INTERNAL DRIVE STYLE | |
| AHYM | NOMINAL THREAD DIAMETER | INCHES 0.3125 |
Cross-references
10 manufacturer part numbers on file for this NSN — each shown against the CAGE code it belongs to.
| Manufacturer part number | CAGE |
|---|---|
| TX1026C5D19A | 27624 |
| TX1026C5D19A | 56878 |
| 3M1169C5D19A | 59563 |
| TX1026C5D19A | 73197 |
| 3M1169C5D19A | 76301 |
| TX1026C5D19A | 80539 |
| TX1026C5D19A | C4293 |
| TX1026C5D19A | 06725 |
| TX1026C5D19A | 06950 |
| 3M1169C5D19A | 0ZC92 |