NSN 5305-01-660-9194 · NIIN 016609194 · FSC 5305
NO DASHES 5305016609194
In Stock
SCREW,CLOSE TOLERANCE
Screws
Application: B1-BACFT
Technical characteristics
23 rows
Straight from the federal item record. Entries the record leaves empty are shown empty — nothing is filled in on its behalf.
| MRC | Requirement | Value |
|---|---|---|
| AAJD | THREAD CLASS | 3A |
| CMLP | THREAD QUANTITY PER INCH | 32 |
| AASA | THREAD LENGTH | INCHES NOMINAL 0.331 |
| AASK | HEAD STYLE | |
| AASL | HEAD DIAMETER | INCHES MINIMUM 0.3390 AND INCHES MAXIMUM 0.3813 |
| AASU | HEAD HEIGHT | INCHES NOMINAL 0.068 |
| AAUR | GRIP DIAMETER | INCHES MINIMUM 0.2177 AND INCHES MAXIMUM 0.2182 |
| PRPY | PROPRIETARY CHARACTERISTICS | PACS |
| SFTT | SURFACE TREATMENT | OVERALL PASSIVATE |
| STDC | SURFACE TREATMENT DOCUMENT AND CLASSIFICATION | OVERALL FED SPEC SINGLE TREATMENT RESPONSE QQ--35 |
| THSD | THREAD SERIES DESIGNATOR | UNIFIED NATIONAL JOINT FINE (UNJF) |
| MDCL | MATERIAL DOCUMENT AND CLASSIFICATION | OVERALL ASSN STD SINGLE MATERIAL RESPONSE A-S 5629 |
| ABQJ | POINT STYLE | |
| AASB | FASTENER LENGTH | INCHES NOMINAL 1.206 |
| AAJF | THREAD DIRECTION | RIGHT-HAND |
| ABQZ | INTERNAL DRIVE STYLE | |
| AGAV | END ITEM IDENTIFICATION | B1-BACFT |
| CWDK | POINT CHAMFER ANGLE | DEGREES NOMINAL 45.0 |
| MATT | MATERIAL | OVERALL STEEL COMP XM-13 |
| AAUY | POINT LENGTH | INCHES NOMINAL 0.040 |
| AHYM | NOMINAL THREAD DIAMETER | INCHES 0.190 |
| CRSQ | COUNTERSINK ANGLE | DEGREES MINIMUM 99.0 AND DEGREES MAXIMUM 101.0 |
| ANEE | GRIP LENGTH | INCHES NOMINAL 0.875 |
Cross-references
10 manufacturer part numbers on file for this NSN — each shown against the CAGE code it belongs to.
| Manufacturer part number | CAGE |
|---|---|
| LD111-0046-2314 | 27624 |
| LD111-0046-2314 | 43999 |
| LD111-0046-2314 | 57928 |
| LD111-0046-2314 | 56878 |
| LD111-0046-2314 | 73197 |
| LD111-0046-2314 | 80539 |
| LD111-0046-2314 | 06710 |
| LD111-0046-2314 | 06725 |
| LD111-0046-2314 | 06950 |
| LD111-0046-2314 | 17446 |