NSN 5305-01-669-9145 · NIIN 016699145 · FSC 5305
NO DASHES 5305016699145
In Stock
SCREW,CLOSE TOLERANCE
Screws
Application: F16
Technical characteristics
20 rows
Straight from the federal item record. Entries the record leaves empty are shown empty — nothing is filled in on its behalf.
| MRC | Requirement | Value |
|---|---|---|
| AHYM | NOMINAL THREAD DIAMETER | INCHES 0.2500 |
| CMLP | THREAD QUANTITY PER INCH | 28 |
| AAUR | GRIP DIAMETER | INCHES MINIMUM 0.2485 AND INCHES MAXIMUM 0.2495 |
| AAJD | THREAD CLASS | 3A |
| MATT | MATERIAL | OVERALL STEEL |
| MDCL | MATERIAL DOCUMENT AND CLASSIFICATION | OVERALL ASSN STD SINGLE MATERIAL RESPONSE A-S 6487 |
| ANEE | GRIP LENGTH | INCHES NOMINAL 1.750 |
| SFTT | SURFACE TREATMENT | OVERALL CADMIUM |
| STDC | SURFACE TREATMENT DOCUMENT AND CLASSIFICATION | OVERALL NATIONAL STD SINGLE TREATMENT RESPONSE NAS672 |
| AAJF | THREAD DIRECTION | RIGHT-HAND |
| AASA | THREAD LENGTH | INCHES NOMINAL 0.370 |
| AASB | FASTENER LENGTH | INCHES MINIMUM 2.105 AND INCHES MAXIMUM 2.135 |
| AASK | HEAD STYLE | |
| CRSQ | COUNTERSINK ANGLE | DEGREES MINIMUM 99.0 AND DEGREES MAXIMUM 101.0 |
| AAWB | SHANK UNTHREADED HOLE DIAMETER | FIRST SHOULDER INCHES MINIMUM 0.076 AND INCHES MAXIMUM 0.086 |
| ABQZ | INTERNAL DRIVE STYLE | |
| AGAV | END ITEM IDENTIFICATION | F16 |
| THSD | THREAD SERIES DESIGNATOR | UNIFIED NATIONAL JOINT FINE (UNJF) |
| AASL | HEAD DIAMETER | INCHES MINIMUM 0.447 AND INCHES MAXIMUM 0.507 |
| CRZS | DISTANCE FROM HEAD LARGEST BEARING SURFACE TO SHANK HOLE CENTER | FIRST HOLE INCHES MINIMUM 1.959 AND INCHES MAXIMUM 1.979 |
Cross-references
9 manufacturer part numbers on file for this NSN — each shown against the CAGE code it belongs to.
| Manufacturer part number | CAGE |
|---|---|
| C7984-4D28 | 27624 |
| C7984-4D28 | 56878 |
| C7984-4D28 | 80539 |
| C7984-4D28 | 81755 |
| C7984 | 81755 |
| C7984-4D28 | 92215 |
| C7984-4D28 | 06950 |
| C7984-4D28 | 06725 |
| C7984-4D28 | 17446 |