NSN 5305-01-683-3886 · NIIN 016833886 · FSC 5305
NO DASHES 5305016833886
In Stock
SCREW,CLOSE TOLERANCE
Screws
Application: F16
Technical characteristics
20 rows
Straight from the federal item record. Entries the record leaves empty are shown empty — nothing is filled in on its behalf.
| MRC | Requirement | Value |
|---|---|---|
| SFTT | SURFACE TREATMENT | OVERALL ALUMINUM AND CHROMATE |
| CQFM | HARDNESS RATING | OVERALL ROCKWELL C MINIMUM 46.0 AND ROCKWELL C MAXIMUM 50.0 |
| AHYM | NOMINAL THREAD DIAMETER | INCHES 0.190 |
| ABQZ | INTERNAL DRIVE STYLE | |
| AASB | FASTENER LENGTH | INCHES NOMINAL 0.738 |
| CRSQ | COUNTERSINK ANGLE | DEGREES MINIMUM 99.0 AND DEGREES MAXIMUM 101.0 |
| MATT | MATERIAL | OVERALL STEEL COMP H11 |
| AGAV | END ITEM IDENTIFICATION | F16 |
| AAJF | THREAD DIRECTION | RIGHT-HAND |
| ANEE | GRIP LENGTH | INCHES NOMINAL 0.375 |
| STDC | SURFACE TREATMENT DOCUMENT AND CLASSIFICATION | OVERALL MIL SPEC SINGLE TREATMENT RESPONSE -IL-C-83488, TYE II, CLASS 3 |
| THSD | THREAD SERIES DESIGNATOR | UNIFIED NATIONAL JOINT FINE (UNJF) |
| AASA | THREAD LENGTH | INCHES NOMINAL 0.363 |
| AAUR | GRIP DIAMETER | INCHES MINIMUM 0.2041 AND INCHES MAXIMUM 0.2051 |
| MDCL | MATERIAL DOCUMENT AND CLASSIFICATION | OVERALL ASSN STD SINGLE MATERIAL RESPONSE A-S 6487 |
| AAJD | THREAD CLASS | 3A |
| CMLP | THREAD QUANTITY PER INCH | 32 |
| CQBC | MINIMUM TENSILE STRENGTH | POUNDS PER SQUARE INCH 220000 |
| AASK | HEAD STYLE | |
| AASL | HEAD DIAMETER | INCHES MINIMUM 0.258 AND INCHES MAXIMUM 0.305 |
Cross-references
11 manufacturer part numbers on file for this NSN — each shown against the CAGE code it belongs to.
| Manufacturer part number | CAGE |
|---|---|
| 121558-3-A6BX | 56878 |
| 121558-3-A6BX | 80539 |
| C7985B3-6R | 81755 |
| VT1694AS36R | 92215 |
| VT1694AS3-6X | 92215 |
| H185B3-6R | 97928 |
| AIC985B3-6R | 06725 |
| VT1694AS3-6X | 06950 |
| VT1694AS36R | 06950 |
| SF117B3-6R | 0K6Z0 |
| H185B3-6R | 17446 |