NSN 5305-01-692-9444 · NIIN 016929444 · FSC 5305
NO DASHES 5305016929444
In Stock
SCREW,MACHINE
Screws
Application: AN/BVY-1(V)4
Technical characteristics
19 rows
Straight from the federal item record. Entries the record leaves empty are shown empty — nothing is filled in on its behalf.
| MRC | Requirement | Value |
|---|---|---|
| AGAV | END ITEM IDENTIFICATION | AN/BVY-1(V)4 |
| AASU | HEAD HEIGHT | INCHES MINIMUM 0.365 AND INCHES MAXIMUM 0.375 |
| AAJF | THREAD DIRECTION | RIGHT-HAND |
| CXCY | PART NAME ASSIGNED BY CONTROLLING AGENCY | PIN, ALIGNMENT |
| AAZP | CHAMFER LENGTH | INCHES NOMINAL 0.225 |
| CYAW | SCREW MATERIAL DOCUMENT AND CLASSIFICATION | ASSN STD SINGLE MATERIAL RESPONSE UNS S32760 OR S32550 |
| PRPY | PROPRIETARY CHARACTERISTICS | PACS |
| THSD | THREAD SERIES DESIGNATOR | UNIFIED NATIONAL COARSE (UNC) |
| ABQZ | INTERNAL DRIVE STYLE | |
| CSYT | CHAMFER ANGLE | DEGREES NOMINAL 25.0 |
| AHYM | NOMINAL THREAD DIAMETER | INCHES 0.375 |
| CMLP | THREAD QUANTITY PER INCH | 16 |
| CYAU | SCREW MATERIAL | STEEL CORROSION RESISTING |
| AASK | HEAD STYLE | |
| ASDB | WIDTH ACROSS FLATS | INCHES MINIMUM 0.250 AND INCHES MAXIMUM 0.253 |
| AASL | HEAD DIAMETER | INCHES MINIMUM 0.733 AND INCHES MAXIMUM 0.737 |
| AAJD | THREAD CLASS | 2A |
| AASA | THREAD LENGTH | INCHES MINIMUM 0.47 |
| AASB | FASTENER LENGTH | INCHES NOMINAL 0.813 |
Cross-references
1 manufacturer part number on file for this NSN — each shown against the CAGE code it belongs to.
| Manufacturer part number | CAGE |
|---|---|
| 101651 | 34228 |