NSN 5305-01-694-4906 · NIIN 016944906 · FSC 5305
NO DASHES 5305016944906
In Stock
SCREW,CLOSE TOLERANCE
Screws
Technical characteristics
17 rows
Straight from the federal item record. Entries the record leaves empty are shown empty — nothing is filled in on its behalf.
| MRC | Requirement | Value |
|---|---|---|
| MATT | MATERIAL | OVERALL NICKEL ALLOY 718 |
| AASB | FASTENER LENGTH | INCHES MINIMUM 0.455 AND INCHES MAXIMUM 0.485 |
| AAUJ | SPLINE MAJOR DIAMETER | INCHES NOMINAL 0.151 |
| SFTT | SURFACE TREATMENT | OVERALL ALUMINUM |
| AASL | HEAD DIAMETER | INCHES MINIMUM 0.3729 AND INCHES MAXIMUM 0.3813 |
| MDCL | MATERIAL DOCUMENT AND CLASSIFICATION | OVERALL ASSN STD SINGLE MATERIAL RESPONSE A-S5662 |
| AAJD | THREAD CLASS | 3A |
| CMLP | THREAD QUANTITY PER INCH | 32 |
| CRSQ | COUNTERSINK ANGLE | DEGREES MINIMUM 99.0 AND DEGREES MAXIMUM 101.0 |
| THSD | THREAD SERIES DESIGNATOR | UNIFIED NATIONAL JOINT FINE (UNJF) |
| ABQZ | INTERNAL DRIVE STYLE | |
| AHYM | NOMINAL THREAD DIAMETER | INCHES 0.1900 |
| ANEE | GRIP LENGTH | INCHES NOMINAL 0.125 |
| AASA | THREAD LENGTH | INCHES NOMINAL 0.345 |
| AASK | HEAD STYLE | |
| AAJF | THREAD DIRECTION | RIGHT-HAND |
| AAUR | GRIP DIAMETER | INCHES MINIMUM 0.1885 AND INCHES MAXIMUM 0.1895 |
Cross-references
6 manufacturer part numbers on file for this NSN — each shown against the CAGE code it belongs to.
| Manufacturer part number | CAGE |
|---|---|
| TX1026C3-2AF | 27624 |
| TX1026C3-2AF | 56878 |
| TX1026C3-2AF | 73197 |
| 3M1169C3-2AF | 76301 |
| 3M1169 | 76301 |
| TX1026C3-2AF | 0PTK6 |