NSN 5305-01-696-7636 · NIIN 016967636 · FSC 5305
NO DASHES 5305016967636
In Stock
SCREW,CAP,HEXAGON HEAD
Screws
Application: 2355-01-669-0331
Technical characteristics
9 rows
Straight from the federal item record. Entries the record leaves empty are shown empty — nothing is filled in on its behalf.
| MRC | Requirement | Value |
|---|---|---|
| AATC | EXTENDED WASHER DIAMETER | MILLIMETERS NOMINAL 32.8 |
| MATT | MATERIAL | OVERALL STEEL PROPERTY CLASS 10.9 |
| PRPY | PROPRIETARY CHARACTERISTICS | PACS |
| AASA | THREAD LENGTH | MILLIMETERS NOMINAL 44.0 |
| AASB | FASTENER LENGTH | MILLIMETERS NOMINAL 140.0 |
| AGAV | END ITEM IDENTIFICATION | 2355-01-669-0331 |
| CXCY | PART NAME ASSIGNED BY CONTROLLING AGENCY | SCREW, HEX, FLANGE, STEEL, METRIC |
| FEAT | SPECIAL FEATURES | ASME Y14.100-2004;ASMEY14.5M-1994;FASTNER MATERIAL SPEC ASME B18.2.3.WM;STEEL CLASS 10.9;SPEC SAE J1199 EXCEPTE LOW CARBON MARTENSITE STEEL SHALL NOTBE USED;OPTIONAL MATERIAL STEEL CLASS 10.9 SPEC ASTM F568M;EXCEPT LOW CARBON MARTENSITE STEEL SHALL NOT BE USED;FASTENER DIMENSIONS SHALL CONFORM TO SPEC ASME B18.2.3.4M;THREADS SHALL BE GENERAL PURPOSE METRIC SCREW THREADS;THREAD TOLERENCE CLASS 6G;PER SPEC ASME B1.13M PRIOR TO COATING;HEAD MARKINGS IAW SPEC ASME B18.2.3.4M;IDENTIFICATION MARKINGS SHALL BE APPLIED PRIOR TO FINAL PROTECTIVE FINISH;FINISH COATING IAW PARAGRAPH 2.0 DRAWING 80212-3000099;QUALITY ASSURANCE,TESTING AND INSPECTION SHALL CONFORM TO SPEC B18.2.3.4M;EVERY LOTOF FASTENERS SHALL HAVE A CERTIFICATE OF COMPLIANCE WITH LOT TRACEABILITY;VERIFICATION OF CHEMICAL ANALYSIS,PHYSICAL PROPERTIES,HARDNESS AND DIMENSIONAL REQURIEMENTS SHALL BE BASED ON A HEAT LOT SAMPLE PLAN;OPTIONAL DESIGN: SHALL MEET THE DIMENSIONAL REQUIREMENTS OF SPEC DIN 6921 OR DIN 1665 |
| AATB | WIDTH BETWEEN FLATS | MILLIMETERS NOMINAL 21.0 |
Cross-references
2 manufacturer part numbers on file for this NSN — each shown against the CAGE code it belongs to.
| Manufacturer part number | CAGE |
|---|---|
| 3001082 | 80212 |
| 3001028-160140 | 80212 |