NSN 5305-01-696-8027 · NIIN 016968027 · FSC 5305
NO DASHES 5305016968027
In Stock
SCREW,CAP,SOCKET HEAD
Screws
Application: 2355-01-669-0331
Technical characteristics
10 rows
Straight from the federal item record. Entries the record leaves empty are shown empty — nothing is filled in on its behalf.
| MRC | Requirement | Value |
|---|---|---|
| AASL | HEAD DIAMETER | MILLIMETERS NOMINAL 17.815 |
| AASB | FASTENER LENGTH | MILLIMETERS NOMINAL 120.0 |
| ASDB | WIDTH ACROSS FLATS | MILLIMETERS NOMINAL 10.076 |
| CXCY | PART NAME ASSIGNED BY CONTROLLING AGENCY | SCREW, CAP, SOCKET HEAD HEX, METRIC |
| FEAT | SPECIAL FEATURES | ASME Y14.100;ASME Y14.5M-1994;FASTNER MATERIAL STEEL ALLOY IAW SPEC ASMEB18.3.1M;FASTNER DIMENSIONS SHALL CONFORM TO TABLE 1, SPEC ASME B18.3.1M;THREADS METRIC COURSE SERIES IAW ASME B1.13M, M PROFILE;THREAD TOLERANCE CLASS 4G6G PRIOR TO COATING;HEXAGON SOCKET DIMENSIONS SHALL CONFORM TO TABLE 2,SPEC ASME B18.3.1M;HEAD MARKINGS IAW SPEC ASME B18.3.1M;IDENTIFICATION MARKINGS SHALL BE APPLIED PRIOR TO FINAL PROTECTIVE FINISH;FINISH COATING IAW PARAGRAPH 2.0;DRAWING 80212-3000099;QUALITY ASSURANCE,TESTING, AND INSPECTION IAW SPEC ASME B18.3.1M;EVERY LOT OF FASTNERS SHALL HAVE A CERTIFICATE OF COMPLIANCE WITH LOT TRACEABILITY;VERIFICATION OF CHEMICAL ANALYSIS,PHYSICAL PROPERTIES,HARDNESS AND DIMENSIONAL REQUIREMENTS SHALL BE BASED ON A HEAT LOT SAMPLE PLAN;EVERY LOT OF FASTNERS SHALL BE TESTED AT 85% OF YIELD STRENGTH FOR 200 HOURS PER MIL-STD-1312-105 IAW NAM1312-105;TORQUE METHOD IS ACCEPTABLE FOR APPLICATION OF LOADS |
| PRPY | PROPRIETARY CHARACTERISTICS | PACS |
| ABQZ | INTERNAL DRIVE STYLE | |
| AGAV | END ITEM IDENTIFICATION | 2355-01-669-0331 |
| AASA | THREAD LENGTH | MILLIMETERS NOMINAL 36.0 |
| MATT | MATERIAL | OVERALL STEEL |
Cross-references
2 manufacturer part numbers on file for this NSN — each shown against the CAGE code it belongs to.
| Manufacturer part number | CAGE |
|---|---|
| 3001042 | 80212 |
| 3001042-120120 | 80212 |