SCREW,CLOSE TOLERANCE

Name: SCREW,CLOSE TOLERANCE
Brand: Atlas Air Supply
SKU: 5305017001459
Availability: LimitedAvailability

Screws

Application: F16

Technical characteristics

23 rows

Straight from the federal item record. Entries the record leaves empty are shown empty — nothing is filled in on its behalf.

Technical characteristics from the federal item record
MRC	Requirement	Value
AASB	FASTENER LENGTH	INCHES MINIMUM 1.105 AND INCHES MAXIMUM 1.135
ANEE	GRIP LENGTH	INCHES NOMINAL 0.750
CMLP	THREAD QUANTITY PER INCH	28
AAJD	THREAD CLASS	3A
THSD	THREAD SERIES DESIGNATOR	UNIFIED NATIONAL JOINT FINE (UNJF)
AASK	HEAD STYLE
SFTT	SURFACE TREATMENT	OVERALL ALUMINUM AND LUBRICANT
AGAV	END ITEM IDENTIFICATION	F16
AHYM	NOMINAL THREAD DIAMETER	INCHES 0.250
AASU	HEAD HEIGHT	INCHES NOMINAL 0.108
AAUR	GRIP DIAMETER	INCHES MINIMUM 0.2641 AND INCHES MAXIMUM 0.2651
AAWU	SINGLE SHEAR STRENGTH	POUNDS PER SQUARE INCH (PSI) 132000
AAJF	THREAD DIRECTION	RIGHT-HAND
AASA	THREAD LENGTH	INCHES NOMINAL 0.370
CXCY	PART NAME ASSIGNED BY CONTROLLING AGENCY	BOLT 100 DEG FLUSH HEAD,TORQ-SET RECESS 132 KSI SHEAR
MATT	MATERIAL	OVERALL STEEL COMP H11
MDCL	MATERIAL DOCUMENT AND CLASSIFICATION	OVERALL ASSN STD SINGLE MATERIAL RESPONSE A-S 6487
ABQZ	INTERNAL DRIVE STYLE
CQFM	HARDNESS RATING	OVERALL ROCKWELL C MINIMUM 46.0 AND ROCKWELL C MAXIMUM 50.0
CRSQ	COUNTERSINK ANGLE	DEGREES MINIMUM 99.0 AND DEGREES MAXIMUM 101.0
STDC	SURFACE TREATMENT DOCUMENT AND CLASSIFICATION	OVERALL MIL SPEC 1ST TREATMENT RESPONSE -IL-C-83488 TYE II,CLASS 3 AND MIL SPEC 2ND TREATMENT RESPONSE -IL-L-46010,TYE I ALIED OVER ALU-INU- COATING
CQBC	MINIMUM TENSILE STRENGTH	POUNDS PER SQUARE INCH 220000
AASL	HEAD DIAMETER	INCHES MINIMUM 0.447 AND INCHES MAXIMUM 0.507

15 manufacturer part numbers on file for this NSN — each shown against the CAGE code it belongs to.