NSN 5305-01-703-2357 · NIIN 017032357 · FSC 5305
NO DASHES 5305017032357
In Stock
SCREW,MACHINE
Screws
Application: F/A-18C/D
Technical characteristics
17 rows
Straight from the federal item record. Entries the record leaves empty are shown empty — nothing is filled in on its behalf.
| MRC | Requirement | Value |
|---|---|---|
| AASL | HEAD DIAMETER | INCHES MINIMUM 0.612 AND INCHES MAXIMUM 0.672 |
| CYBA | SCREW SURFACE TREATMENT | PASSIVATE |
| AASK | HEAD STYLE | |
| PRPY | PROPRIETARY CHARACTERISTICS | PACS |
| THSD | THREAD SERIES DESIGNATOR | UNIFIED NATIONAL JOINT FINE (UNJF) |
| CMLP | THREAD QUANTITY PER INCH | 20 |
| AASB | FASTENER LENGTH | INCHES MINIMUM 1.735 AND INCHES MAXIMUM 1.765 |
| AHYM | NOMINAL THREAD DIAMETER | INCHES 0.4375 |
| CYBE | SCREW SURFACE TREATMENT DOCUMENT AND CLASSIFICATION | ASSN STD SINGLE TREATMENT RESPONSE A-S 2700 |
| AAJF | THREAD DIRECTION | RIGHT-HAND |
| AASA | THREAD LENGTH | INCHES NOMINAL 0.5625 |
| CYAW | SCREW MATERIAL DOCUMENT AND CLASSIFICATION | ASSN STD SINGLE MATERIAL RESPONSE A-S 5629 |
| CRSQ | COUNTERSINK ANGLE | DEGREES MINIMUM 99.0 AND DEGREES MAXIMUM 101.0 |
| CYAU | SCREW MATERIAL | STEEL CORROSION RESISTING |
| AAJD | THREAD CLASS | 3A |
| AGAV | END ITEM IDENTIFICATION | F/A-18C/D |
| ABQZ | INTERNAL DRIVE STYLE |
Cross-references
3 manufacturer part numbers on file for this NSN — each shown against the CAGE code it belongs to.
| Manufacturer part number | CAGE |
|---|---|
| 11873-7-19-9 | 59563 |
| 3M707 | 76301 |
| 3M707-7-19-9 | 76301 |