NSN 5305-01-703-3738 · NIIN 017033738 · FSC 5305
NO DASHES 5305017033738
In Stock
SCREW,CLOSE TOLERANCE
Screws
Application: EA-18G
Technical characteristics
19 rows
Straight from the federal item record. Entries the record leaves empty are shown empty — nothing is filled in on its behalf.
| MRC | Requirement | Value |
|---|---|---|
| CRSQ | COUNTERSINK ANGLE | DEGREES MINIMUM 99.0 AND DEGREES MAXIMUM 101.0 |
| AAJF | THREAD DIRECTION | RIGHT-HAND |
| AAUR | GRIP DIAMETER | INCHES MINIMUM 0.3115 AND INCHES MAXIMUM 0.3120 |
| STDC | SURFACE TREATMENT DOCUMENT AND CLASSIFICATION | OVERALL ASSN STD SINGLE TREATMENT RESPONSE A-S2700, -ETHOD 1 |
| ABQZ | INTERNAL DRIVE STYLE | |
| AGAV | END ITEM IDENTIFICATION | EA-18G |
| MATT | MATERIAL | OVERALL STEEL COMP XM-13 |
| AASL | HEAD DIAMETER | INCHES MINIMUM 0.625 AND INCHES MAXIMUM 0.635 |
| CMLP | THREAD QUANTITY PER INCH | 24 |
| CQBC | MINIMUM TENSILE STRENGTH | POUNDS PER SQUARE INCH 125000 |
| AASB | FASTENER LENGTH | INCHES NOMINAL 0.9375 |
| AASK | HEAD STYLE | |
| AAJD | THREAD CLASS | 3A |
| SFTT | SURFACE TREATMENT | OVERALL PASSIVATE |
| AHYM | NOMINAL THREAD DIAMETER | INCHES 0.3125 |
| ANEE | GRIP LENGTH | INCHES NOMINAL 0.5625 |
| MDCL | MATERIAL DOCUMENT AND CLASSIFICATION | OVERALL AEROSPACE MATERIAL SPEC STD SINGLE MATERIAL RESPONSE A-S5629, H13-8-O |
| AASA | THREAD LENGTH | INCHES NOMINAL 0.375 |
| THSD | THREAD SERIES DESIGNATOR | UNIFIED NATIONAL JOINT FINE (UNJF) |
Cross-references
16 manufacturer part numbers on file for this NSN — each shown against the CAGE code it belongs to.
| Manufacturer part number | CAGE |
|---|---|
| ST3M714-5-9 | 1VSL7 |
| HT4049-5-9 | 27624 |
| HT4049-5-9 | 56878 |
| 11931-5-9 | 59563 |
| ST3M714-5-9 | 58998 |
| WC4049-5-9 | 60516 |
| HT4049-5-9 | 73197 |
| ST3M714-5-9 | 76301 |
| HT4049-5-9 | 80539 |
| HT4049-5-9 | 92215 |
| HT4049-5-9 | K5673 |
| ST3M714-5-9 | 06710 |
| HT4049-5-9 | 06950 |
| HT4049-5-9 | 06725 |
| ST3M714-5-9 | 0ZC92 |
| HT4049-5-9 | 17446 |