NSN 5305-01-703-3981 · NIIN 017033981 · FSC 5305
NO DASHES 5305017033981
In Stock
SCREW,CLOSE TOLERANCE
Screws
Application: EA-18G
Technical characteristics
19 rows
Straight from the federal item record. Entries the record leaves empty are shown empty — nothing is filled in on its behalf.
| MRC | Requirement | Value |
|---|---|---|
| AAUR | GRIP DIAMETER | INCHES MINIMUM 0.2490 AND INCHES MAXIMUM 0.2495 |
| ANEE | GRIP LENGTH | INCHES NOMINAL 0.750 |
| AAJF | THREAD DIRECTION | RIGHT-HAND |
| AASL | HEAD DIAMETER | INCHES MINIMUM 0.497 AND INCHES MAXIMUM 0.507 |
| AASB | FASTENER LENGTH | INCHES NOMINAL 1.066 |
| AASK | HEAD STYLE | |
| AAJD | THREAD CLASS | 3A |
| THSD | THREAD SERIES DESIGNATOR | UNIFIED NATIONAL JOINT FINE (UNJF) |
| AHYM | NOMINAL THREAD DIAMETER | INCHES 0.250 |
| ABQZ | INTERNAL DRIVE STYLE | |
| CQBC | MINIMUM TENSILE STRENGTH | POUNDS PER SQUARE INCH 120000 |
| CRSQ | COUNTERSINK ANGLE | DEGREES MINIMUM 99.0 AND DEGREES MAXIMUM 101.0 |
| MATT | MATERIAL | OVERALL STEEL COMP XM-13 |
| MDCL | MATERIAL DOCUMENT AND CLASSIFICATION | OVERALL AEROSPACE MATERIAL SPEC STD SINGLE MATERIAL RESPONSE A-S5629, H13-8-O |
| SFTT | SURFACE TREATMENT | OVERALL PASSIVATE |
| AGAV | END ITEM IDENTIFICATION | EA-18G |
| STDC | SURFACE TREATMENT DOCUMENT AND CLASSIFICATION | OVERALL ASSN STD SINGLE TREATMENT RESPONSE A-S2700, -ETHOD 1 |
| AASA | THREAD LENGTH | INCHES NOMINAL 0.316 |
| CMLP | THREAD QUANTITY PER INCH | 28 |
Cross-references
16 manufacturer part numbers on file for this NSN — each shown against the CAGE code it belongs to.
| Manufacturer part number | CAGE |
|---|---|
| ST3M714-4-12 | 1VSL7 |
| HT4049-4-12 | 27624 |
| HT4049-4-12 | 56878 |
| WC4049-4-12 | 60516 |
| 11931-4-12 | 59563 |
| ST3M714-4-12 | 58998 |
| HT4049-4-12 | 73197 |
| ST3M714-4-12 | 76301 |
| HT4049-4-12 | 80539 |
| HT4049-4-12 | 92215 |
| HT4049-4-12 | K5673 |
| ST3M714-4-12 | 06710 |
| HT4049-4-12 | 06950 |
| HT4049-4-12 | 06725 |
| ST3M714-4-12 | 0ZC92 |
| HT4049-4-12 | 17446 |