NSN 5305-01-734-0148 · NIIN 017340148 · FSC 5305
NO DASHES 5305017340148
In Stock
SCREW,CAP,SOCKET HEAD
Screws
Technical characteristics
19 rows
Straight from the federal item record. Entries the record leaves empty are shown empty — nothing is filled in on its behalf.
| MRC | Requirement | Value |
|---|---|---|
| SFTT | SURFACE TREATMENT | OVERALL PASSIVATE |
| CSYT | CHAMFER ANGLE | DEGREES MINIMUM 30.0 AND DEGREES MAXIMUM 45.0 |
| AASL | HEAD DIAMETER | INCHES MINIMUM 0.365 AND INCHES MAXIMUM 0.375 |
| ABQZ | INTERNAL DRIVE STYLE | |
| AASK | HEAD STYLE | |
| AASA | THREAD LENGTH | INCHES MINIMUM 0.72 AND INCHES MAXIMUM 0.75 |
| AHYM | NOMINAL THREAD DIAMETER | INCHES 0.2500 |
| AAJF | THREAD DIRECTION | RIGHT-HAND |
| AAJD | THREAD CLASS | 3A |
| AASB | FASTENER LENGTH | INCHES MINIMUM 0.72 AND INCHES MAXIMUM 0.75 |
| ZZZK | SPECIFICATION/STANDARD DATA | MANUFACTURERS STANDARD 80205-NAS1352 |
| MATT | MATERIAL | OVERALL STEEL CORROSION RESISTING |
| ASDB | WIDTH ACROSS FLATS | INCHES NOMINAL 0.188 |
| CMLP | THREAD QUANTITY PER INCH | 20 |
| MDCL | MATERIAL DOCUMENT AND CLASSIFICATION | OVERALL MIL SPEC SINGLE MATERIAL RESPONSE FF-S-86 |
| AASU | HEAD HEIGHT | INCHES MINIMUM 0.244 AND INCHES MAXIMUM 0.250 |
| THSD | THREAD SERIES DESIGNATOR | UNRC |
| STDC | SURFACE TREATMENT DOCUMENT AND CLASSIFICATION | OVERALL FED SPEC SINGLE TREATMENT RESPONSE A-S2700, -ETHOD 2 |
| CXCY | PART NAME ASSIGNED BY CONTROLLING AGENCY | SCREW CAP SOCKET HEAD UNDRILLED PLAN CORROSION RESISTANT |
Cross-references
6 manufacturer part numbers on file for this NSN — each shown against the CAGE code it belongs to.
| Manufacturer part number | CAGE |
|---|---|
| 752-8843787-39 | 53711 |
| NAS1352 | 80205 |
| NAS1352C4-12G | 80205 |
| 68-04-1075 | 96169 |
| LSA002801-39 | 96169 |
| R8321661-39 | 96169 |