NSN 5305-01-734-2045 · NIIN 017342045 · FSC 5305
NO DASHES 5305017342045
In Stock
SCREW,CAP,SOCKET HEAD
Screws
Technical characteristics
20 rows
Straight from the federal item record. Entries the record leaves empty are shown empty — nothing is filled in on its behalf.
| MRC | Requirement | Value |
|---|---|---|
| STDC | SURFACE TREATMENT DOCUMENT AND CLASSIFICATION | OVERALL ASSN STD SINGLE TREATMENT RESPONSE A-S2700, -ETHOD 1, TYE 6 OR TYE 7, CLASS 4 |
| AASL | HEAD DIAMETER | INCHES MINIMUM 0.303 AND INCHES MAXIMUM 0.312 |
| THSD | THREAD SERIES DESIGNATOR | UNRC |
| AAJD | THREAD CLASS | 3A |
| AAJF | THREAD DIRECTION | RIGHT-HAND |
| AASU | HEAD HEIGHT | INCHES MINIMUM 0.185 AND INCHES MAXIMUM 0.190 |
| MDCL | MATERIAL DOCUMENT AND CLASSIFICATION | OVERALL FED SPEC SINGLE MATERIAL RESPONSE FF-S-86 |
| ABQZ | INTERNAL DRIVE STYLE | |
| AHYM | NOMINAL THREAD DIAMETER | INCHES 0.1900 |
| ASDB | WIDTH ACROSS FLATS | INCHES NOMINAL 0.156 |
| CMLP | THREAD QUANTITY PER INCH | 24 |
| SFTT | SURFACE TREATMENT | OVERALL BLACK OXIDE |
| CXCY | PART NAME ASSIGNED BY CONTROLLING AGENCY | SCREW CAP SOCKET HEAD UNDRILLED CORROSION RESISTANT STEEL |
| AASB | FASTENER LENGTH | INCHES MINIMUM 1.46 AND INCHES MAXIMUM 1.50 |
| ZZZK | SPECIFICATION/STANDARD DATA | NATIONAL STD/SPEC 80205-NAS1352 |
| FEAT | SPECIAL FEATURES | DRILLED HEAD NO MEASUREMENT FOR HOLES |
| MATT | MATERIAL | OVERALL STEEL CORROSION RESISTING |
| AASA | THREAD LENGTH | INCHES NOMINAL 0.875 |
| AASK | HEAD STYLE | |
| CSYT | CHAMFER ANGLE | DEGREES MINIMUM 30.0 AND DEGREES MAXIMUM 45.0 |
Cross-references
2 manufacturer part numbers on file for this NSN — each shown against the CAGE code it belongs to.
| Manufacturer part number | CAGE |
|---|---|
| NAS1352C3H24 | 80205 |
| NAS1352 | 80205 |