NSN 5305-01-735-6009 · NIIN 017356009 · FSC 5305
NO DASHES 5305017356009
In Stock
SCREW,CAP,SOCKET HEAD
Screws
Technical characteristics
19 rows
Straight from the federal item record. Entries the record leaves empty are shown empty — nothing is filled in on its behalf.
| MRC | Requirement | Value |
|---|---|---|
| STDC | SURFACE TREATMENT DOCUMENT AND CLASSIFICATION | OVERALL ASSN STD SINGLE TREATMENT RESPONSE A-S2700, -ETHOD 2 NO OST TREAT-ENT |
| THSD | THREAD SERIES DESIGNATOR | UNRC |
| ZZZK | SPECIFICATION/STANDARD DATA | NATIONAL STD/SPEC 80205-NAS1352 |
| AASB | FASTENER LENGTH | INCHES MINIMUM 3.92 AND INCHES MAXIMUM 4.00 |
| AASK | HEAD STYLE | |
| AASL | HEAD DIAMETER | INCHES MINIMUM 0.735 AND INCHES MAXIMUM 0.750 |
| AASU | HEAD HEIGHT | INCHES MINIMUM 0.492 AND INCHES MAXIMUM 0.500 |
| CXCY | PART NAME ASSIGNED BY CONTROLLING AGENCY | SCREW CAP SOCKET HEAD DRILLED HEAT RESISTANT STEEL |
| AHYM | NOMINAL THREAD DIAMETER | INCHES 0.5000 |
| AASA | THREAD LENGTH | INCHES NOMINAL 1.500 |
| SFTT | SURFACE TREATMENT | OVERALL PASSIVATE |
| ASDB | WIDTH ACROSS FLATS | INCHES NOMINAL 0.375 |
| CMLP | THREAD QUANTITY PER INCH | 13 |
| CSYT | CHAMFER ANGLE | DEGREES MINIMUM 30.0 AND DEGREES MAXIMUM 45.0 |
| AAJD | THREAD CLASS | 3A |
| ABQZ | INTERNAL DRIVE STYLE | |
| MATT | MATERIAL | OVERALL STEEL |
| MDCL | MATERIAL DOCUMENT AND CLASSIFICATION | OVERALL AEROSPACE MATERIAL SPEC STD SINGLE MATERIAL RESPONSE A-S5731 OR AEROSPACE MATERIAL SPEC STD SINGLE MATERIAL RESPONSE A-S5737 |
| AAJF | THREAD DIRECTION | RIGHT-HAND |
Cross-references
4 manufacturer part numbers on file for this NSN — each shown against the CAGE code it belongs to.
| Manufacturer part number | CAGE |
|---|---|
| 801-6640812-101-1 | 53711 |
| NAS1352N8H64G | 80205 |
| NAS1352 | 80205 |
| 2633-166-01-101-1 | 96169 |