NSN 5305-00-600-8993 · NIIN 006008993 · FSC 5305
NO DASHES 5305006008993
In Stock
SCREW,SHOULDER
Screws
Technical characteristics
20 rows
Straight from the federal item record. Entries the record leaves empty are shown empty — nothing is filled in on its behalf.
| MRC | Requirement | Value |
|---|---|---|
| AAJF | THREAD DIRECTION | RIGHT-HAND |
| SFTT | SURFACE TREATMENT | OVERALL PHOSPHATE |
| THSD | THREAD SERIES DESIGNATOR | UNF |
| AHYM | NOMINAL THREAD DIAMETER | INCHES 0.438 |
| CMLP | THREAD QUANTITY PER INCH | 20 |
| CQFM | HARDNESS RATING | OVERALL ROCKWELL C MINIMUM 38.0 AND ROCKWELL C MAXIMUM 46.0 |
| CRZS | DISTANCE FROM HEAD LARGEST BEARING SURFACE TO SHANK HOLE CENTER | FIRST HOLE INCHES NOMINAL 0.125 |
| CWYB | SHOULDER SHAPE | FIRST SHOULDER ROUND |
| FEAT | SPECIAL FEATURES | ROOVE 0.083 IN. LG 0.369 IN. DIA. AND SLOT IN THD END |
| AAJD | THREAD CLASS | 3A |
| AAWB | SHANK UNTHREADED HOLE DIAMETER | FIRST HOLE INCHES MINIMUM 0.077 AND INCHES MAXIMUM 0.087 |
| AASA | THREAD LENGTH | INCHES MINIMUM 0.327 AND INCHES MAXIMUM 0.357 |
| AASB | FASTENER LENGTH | INCHES MINIMUM 0.660 AND INCHES MAXIMUM 0.690 |
| AASK | HEAD STYLE | |
| AASL | HEAD DIAMETER | INCHES MINIMUM 0.740 AND INCHES MAXIMUM 0.760 |
| AASU | HEAD HEIGHT | INCHES MINIMUM 0.333 AND INCHES MAXIMUM 0.368 |
| AATN | SHOULDER DIAMETER | FIRST SHOULDER INCHES MINIMUM 0.615 AND INCHES MAXIMUM 0.635 |
| AATX | SHOULDER LENGTH | FIRST SHOULDER INCHES MINIMUM 0.240 AND INCHES MAXIMUM 0.260 |
| ABQZ | INTERNAL DRIVE STYLE | |
| MATT | MATERIAL | OVERALL STEEL COMP 4140 |
Supersedes
This item replaces cancelled NIIN 003446484. An older drawing citing one of those numbers resolves here.