NSN 5305-00-685-3509 · NIIN 006853509 · FSC 5305
NO DASHES 5305006853509
In Stock
SCREW,CAP,HEXAGON HEAD
Screws
Application: MRAP - COUGAR CAT1 A2; MEDIUM MINE PROTECTED VEHICLE - MMPV
Technical characteristics
18 rows
Straight from the federal item record. Entries the record leaves empty are shown empty — nothing is filled in on its behalf.
| MRC | Requirement | Value |
|---|---|---|
| AAJF | THREAD DIRECTION | RIGHT-HAND |
| CQHQ | MINIMUM YIELD STRENGTH | POUNDS PER SQUARE INCH 30000 |
| AASU | HEAD HEIGHT | INCHES MINIMUM 0.226 AND INCHES MAXIMUM 0.243 |
| AAJD | THREAD CLASS | 2A |
| AASK | HEAD STYLE | |
| MATT | MATERIAL | OVERALL STEEL COMP 301 OR STEEL COMP 302 OR STEEL COMP 302B OR STEEL COMP 303 OR STEEL COMP 303SE OR STEEL COMP 304 OR STEEL COMP 304L OR STEEL COMP 305 OR STEEL COMP 308 OR STEEL COMP 309 OR STEEL COMP 309S OR STEEL COMP 310 OR STEEL COMP 310S OR STEEL COMP 314 OR STEEL COMP 316 OR STEEL COMP 316L OR STEEL COMP 317 OR STEEL COMP 321 OR STEEL COMP 347 OR STEEL COMP 348 OR STEEL COMP 384 OR STEEL COMP 385 |
| MDCL | MATERIAL DOCUMENT AND CLASSIFICATION | OVERALL FED STD ALL MATERIAL RESPONSES 66 |
| SFTT | SURFACE TREATMENT | OVERALL PASSIVATE |
| AHYM | NOMINAL THREAD DIAMETER | INCHES 0.375 |
| CMLP | THREAD QUANTITY PER INCH | 24 |
| CQBC | MINIMUM TENSILE STRENGTH | POUNDS PER SQUARE INCH 80000 |
| CQFM | HARDNESS RATING | OVERALL ROCKWELL C MINIMUM 80.0 |
| AATB | WIDTH BETWEEN FLATS | INCHES MINIMUM 0.551 AND INCHES MAXIMUM 0.562 |
| AASA | THREAD LENGTH | INCHES MINIMUM 1.105 AND INCHES MAXIMUM 1.250 |
| STDC | SURFACE TREATMENT DOCUMENT AND CLASSIFICATION | OVERALL FED SPEC SINGLE TREATMENT RESPONSE QQ--35 |
| THSD | THREAD SERIES DESIGNATOR | UNF |
| AASB | FASTENER LENGTH | INCHES MINIMUM 1.188 AND INCHES MAXIMUM 1.250 |
| AGAV | END ITEM IDENTIFICATION | MRAP - COUGAR CAT1 A2; MEDIUM MINE PROTECTED VEHICLE - MMPV |
Supersedes
This item replaces cancelled NIIN 010211013. An older drawing citing one of those numbers resolves here.