BOLT,CLOSE TOLERANCE

Name: BOLT,CLOSE TOLERANCE
Brand: Atlas Air Supply
SKU: 5306000050546
Availability: LimitedAvailability

Bolts

Technical characteristics

21 rows

Straight from the federal item record. Entries the record leaves empty are shown empty — nothing is filled in on its behalf.

Technical characteristics from the federal item record
MRC	Requirement	Value
AAUR	GRIP DIAMETER	INCHES MINIMUM 0.3108 AND INCHES MAXIMUM 0.3117
AAUM	LOCKING FEATURE	GRIP DETENT BALL
AATB	WIDTH BETWEEN FLATS	INCHES MINIMUM 0.492 AND INCHES MAXIMUM 0.502
AASK	HEAD STYLE
AASU	HEAD HEIGHT	INCHES MINIMUM 0.157 AND INCHES MAXIMUM 0.172
AASB	FASTENER LENGTH	INCHES MINIMUM 2.665 AND INCHES MAXIMUM 2.685
AAJD	THREAD CLASS	3A
AAJF	THREAD DIRECTION	RIGHT-HAND
AASA	THREAD LENGTH	INCHES MINIMUM 0.310 AND INCHES MAXIMUM 0.377
AAWB	SHANK UNTHREADED HOLE DIAMETER	FIRST HOLE INCHES MINIMUM 0.076 AND INCHES MAXIMUM 0.086
AHYM	NOMINAL THREAD DIAMETER	INCHES 0.312
ANEE	GRIP LENGTH	INCHES MINIMUM 2.188 AND INCHES MAXIMUM 2.204
CMLP	THREAD QUANTITY PER INCH	24
CQBC	MINIMUM TENSILE STRENGTH	POUNDS PER SQUARE INCH 7510
CRZS	DISTANCE FROM HEAD LARGEST BEARING SURFACE TO SHANK HOLE CENTER	FIRST HOLE INCHES MINIMUM 2.209 AND INCHES MAXIMUM 2.303
CSYM	SURFACE FINISH	BEARING SURFACE OF HEAD MICROINCHES 63.0
CSYM	SURFACE FINISH	GRIP MICROINCHES 63.0
MATT	MATERIAL	OVERALL STEEL COMP E4340 OR STEEL COMP 4140 OR STEEL COMP 8740 OR STEEL COMP 4130 OR STEEL COMP 6150
SFTT	SURFACE TREATMENT	OVERALL CADMIUM AND CHROMATE
STDC	SURFACE TREATMENT DOCUMENT AND CLASSIFICATION	OVERALL FED SPEC SINGLE TREATMENT RESPONSE QQ--416 TY 2 CL 2
THSD	THREAD SERIES DESIGNATOR	UNIFIED NATIONAL JOINT FINE (UNJF)

8 manufacturer part numbers on file for this NSN — each shown against the CAGE code it belongs to.