NSN 5306-00-031-6357 · NIIN 000316357 · FSC 5306
NO DASHES 5306000316357
In Stock
BOLT,EXTERNALLY RELIEVED BODY
Bolts
Technical characteristics
22 rows
Straight from the federal item record. Entries the record leaves empty are shown empty — nothing is filled in on its behalf.
| MRC | Requirement | Value |
|---|---|---|
| AAJD | THREAD CLASS | 1A |
| AAJF | THREAD DIRECTION | RIGHT-HAND |
| AASA | THREAD LENGTH | INCHES MINIMUM 0.350 AND INCHES MAXIMUM 0.370 |
| AASB | FASTENER LENGTH | INCHES MINIMUM 1.700 AND INCHES MAXIMUM 1.720 |
| AASK | HEAD STYLE | |
| AASU | HEAD HEIGHT | INCHES MINIMUM 0.180 AND INCHES MAXIMUM 0.200 |
| AATB | WIDTH BETWEEN FLATS | INCHES MINIMUM 0.555 AND INCHES MAXIMUM 0.564 |
| AAWB | SHANK UNTHREADED HOLE DIAMETER | FIRST HOLE INCHES MINIMUM 0.065 AND INCHES MAXIMUM 0.075 |
| AAWC | FIRST DIAMETER FROM HEAD | INCHES MINIMUM 0.372 AND INCHES MAXIMUM 0.373 |
| AAWD | SECOND DIAMETER FROM HEAD | INCHES MINIMUM 0.210 AND INCHES MAXIMUM 0.230 |
| AAWE | THIRD DIAMETER FROM HEAD | INCHES MINIMUM 0.372 AND INCHES MAXIMUM 0.373 |
| AAWH | DISTANCE FROM LARGEST BEARING SURFACE OF HEAD TO END OF FIRST DIAMETER | INCHES MINIMUM 0.130 AND INCHES MAXIMUM 0.150 |
| AAWJ | DISTANCE FROM LARGEST BEARING SURFACE OF HEAD TO END OF SECOND DIAMETER | INCHES MINIMUM 1.060 AND INCHES MAXIMUM 1.100 |
| AAWK | DISTANCE FROM LARGEST BEARING SURFACE OF HEAD TO END OF THIRD DIAMETER | INCHES MINIMUM 1.190 AND INCHES MAXIMUM 1.210 |
| AHYM | NOMINAL THREAD DIAMETER | INCHES 0.250 |
| CMLP | THREAD QUANTITY PER INCH | 28 |
| CQFM | HARDNESS RATING | OVERALL ROCKWELL C MINIMUM 30.0 AND ROCKWELL C MAXIMUM 38.0 |
| CRZS | DISTANCE FROM HEAD LARGEST BEARING SURFACE TO SHANK HOLE CENTER | FIRST HOLE INCHES MINIMUM 1.590 AND INCHES MAXIMUM 1.610 |
| CSNG | EXTERNALLY RELIEVED BODY DIAMETER QUANTITY | 3 |
| MATT | MATERIAL | OVERALL STEEL CORROSION RESISTING |
| MDCL | MATERIAL DOCUMENT AND CLASSIFICATION | OVERALL ASSN STD SINGLE MATERIAL RESPONSE A-S 5616 |
| THSD | THREAD SERIES DESIGNATOR | UNF |