NSN 5306-00-088-2192 · NIIN 000882192 · FSC 5306
NO DASHES 5306000882192
In Stock
BOLT,MACHINE
Bolts
Technical characteristics
24 rows
Straight from the federal item record. Entries the record leaves empty are shown empty — nothing is filled in on its behalf.
| MRC | Requirement | Value |
|---|---|---|
| ANEE | GRIP LENGTH | INCHES MINIMUM 0.313 AND INCHES MAXIMUM 0.375 |
| CBBL | FEATURES PROVIDED | FINISHED HEAD |
| CMLP | THREAD QUANTITY PER INCH | 28 |
| CQFM | HARDNESS RATING | OVERALL ROCKWELL C MINIMUM 30.0 AND ROCKWELL C MAXIMUM 38.0 |
| CRHC | HOLE CONFIGURATION STYLE | |
| CRTL | CRITICALITY CODE JUSTIFICATION | FEAT |
| FEAT | SPECIAL FEATURES | CRITICAL FEATURES, TOLERANCES, FIT RESTRICTIONS, MATERIAL PROPERTIES ANDMANUFACTURING PROCESS. FAILURE COULD RESULT IN LOSS OR SUBSTANTIAL DAMAGE TO WEAPON SYSTEM, DEATH OR SERIOUS INJURY. |
| MATT | MATERIAL | OVERALL STEEL COMP 601 |
| MDCL | MATERIAL DOCUMENT AND CLASSIFICATION | OVERALL ASSN STD SINGLE MATERIAL RESPONSE A-S 6304 |
| AHYM | NOMINAL THREAD DIAMETER | INCHES 0.250 |
| ASXK | HOLE QUANTITY | 4 |
| AATC | EXTENDED WASHER DIAMETER | INCHES NOMINAL 0.448 |
| AATD | EXTENDED WASHER THICKNESS | INCHES NOMINAL 0.070 |
| AAUB | HOLE DIAMETER | INCHES NOMINAL 0.062 |
| BQDM | HOLE TYPE | DRILLED |
| AASU | HEAD HEIGHT | INCHES NOMINAL 0.340 |
| AATB | WIDTH BETWEEN FLATS | INCHES MINIMUM 0.304 AND INCHES MAXIMUM 0.313 |
| AAJD | THREAD CLASS | 3A |
| AAJF | THREAD DIRECTION | RIGHT-HAND |
| AASA | THREAD LENGTH | INCHES MINIMUM 0.790 |
| AASB | FASTENER LENGTH | INCHES NOMINAL 1.135 |
| AASK | HEAD STYLE | |
| SFTT | SURFACE TREATMENT | OVERALL NICKEL AND CADMIUM |
| THSD | THREAD SERIES DESIGNATOR | UNF |