NSN 5306-00-097-6867 · NIIN 000976867 · FSC 5306
NO DASHES 5306000976867
In Stock
BOLT,MACHINE
Bolts
Technical characteristics
21 rows
Straight from the federal item record. Entries the record leaves empty are shown empty — nothing is filled in on its behalf.
| MRC | Requirement | Value |
|---|---|---|
| CMLP | THREAD QUANTITY PER INCH | 28 |
| CQFM | HARDNESS RATING | OVERALL ROCKWELL C MINIMUM 30.0 AND ROCKWELL C MAXIMUM 38.0 |
| CBBL | FEATURES PROVIDED | FINISHED HEAD |
| THSD | THREAD SERIES DESIGNATOR | UNIFIED NATIONAL JOINT FINE (UNJF) |
| AAJF | THREAD DIRECTION | RIGHT-HAND |
| AHYM | NOMINAL THREAD DIAMETER | INCHES 0.250 |
| ANEE | GRIP LENGTH | INCHES MINIMUM 1.060 AND INCHES MAXIMUM 1.120 |
| MATT | MATERIAL | OVERALL STEEL CORROSION RESISTING |
| MDCL | MATERIAL DOCUMENT AND CLASSIFICATION | OVERALL ASSN STD SINGLE MATERIAL RESPONSE A-S 5616 |
| AAJD | THREAD CLASS | 3A |
| AAWB | SHANK UNTHREADED HOLE DIAMETER | FIRST HOLE INCHES MINIMUM 0.065 AND INCHES MAXIMUM 0.072 |
| FEAT | SPECIAL FEATURES | 2 HOLES 90 DEGREES APART |
| AATB | WIDTH BETWEEN FLATS | INCHES MINIMUM 0.430 AND INCHES MAXIMUM 0.439 |
| CSYM | SURFACE FINISH | TOP OF HEAD MICROINCHES 125.0 |
| AASU | HEAD HEIGHT | INCHES MINIMUM 0.110 AND INCHES MAXIMUM 0.120 |
| AASK | HEAD STYLE | |
| CRZS | DISTANCE FROM HEAD LARGEST BEARING SURFACE TO SHANK HOLE CENTER | FIRST HOLE INCHES MINIMUM 1.275 AND INCHES MAXIMUM 1.285 |
| CSYM | SURFACE FINISH | BEARING SURFACE OF HEAD MICROINCHES 63.0 |
| CSYM | SURFACE FINISH | GRIP MICROINCHES 63.0 |
| AASA | THREAD LENGTH | INCHES MINIMUM 0.260 AND INCHES MAXIMUM 0.340 |
| AASB | FASTENER LENGTH | INCHES MINIMUM 1.380 AND INCHES MAXIMUM 1.400 |