NSN 5306-00-137-6580 · NIIN 001376580 · FSC 5306
NO DASHES 5306001376580
In Stock
BOLT,CLOSE TOLERANCE
Bolts
Technical characteristics
17 rows
Straight from the federal item record. Entries the record leaves empty are shown empty — nothing is filled in on its behalf.
| MRC | Requirement | Value |
|---|---|---|
| AASU | HEAD HEIGHT | INCHES NOMINAL 0.164 |
| AAUR | GRIP DIAMETER | INCHES MINIMUM 0.2485 AND INCHES MAXIMUM 0.2495 |
| MATT | MATERIAL | OVERALL STEEL |
| MDCL | MATERIAL DOCUMENT AND CLASSIFICATION | OVERALL MFR REF SINGLE MATERIAL RESPONSE H-11,STSBS001 FSC- 88703 |
| AATB | WIDTH BETWEEN FLATS | INCHES MINIMUM 0.430 AND INCHES MAXIMUM 0.439 |
| AASB | FASTENER LENGTH | INCHES MINIMUM 1.277 AND INCHES MAXIMUM 1.324 |
| AASK | HEAD STYLE | |
| AASA | THREAD LENGTH | INCHES MINIMUM 0.277 AND INCHES MAXIMUM 0.324 |
| AAJD | THREAD CLASS | 3A |
| AAJF | THREAD DIRECTION | RIGHT-HAND |
| AHYM | NOMINAL THREAD DIAMETER | INCHES 0.250 |
| ANEE | GRIP LENGTH | INCHES NOMINAL 1.000 |
| CMLP | THREAD QUANTITY PER INCH | 28 |
| CQBC | MINIMUM TENSILE STRENGTH | POUNDS PER SQUARE INCH 156000 |
| CSYM | SURFACE FINISH | BEARING SURFACE OF HEAD MICROINCHES 32.0 |
| CSYM | SURFACE FINISH | GRIP MICROINCHES 32.0 |
| THSD | THREAD SERIES DESIGNATOR | UNIFIED NATIONAL JOINT FINE (UNJF) |
Cross-references
11 manufacturer part numbers on file for this NSN — each shown against the CAGE code it belongs to.
| Manufacturer part number | CAGE |
|---|---|
| PBF1042A4U016 | 27624 |
| 68485-4A16 | 56878 |
| 11701A04U016 | 59563 |
| 68485-4A16 | 80539 |
| VS2979A04U016 | 92215 |
| BM3210-4A016 | 97928 |
| STSBG001A04U016 | 98897 |
| VS2979A04U016 | 06950 |
| AIC2264A04U016 | 06725 |
| VAL23602-4D016 | 06710 |
| BM3210-4A016 | 17446 |
Supersedes
This item replaces cancelled NIIN 004790261. An older drawing citing one of those numbers resolves here.